Technical Answer: Art paint construction technology - wipe color, rub color

With the improvement of consumers' living standards and the upgrading of consumption structure, it forces paint enterprises to innovate and innovate. Art coatings are to meet the diverse needs of consumers and gradually in the market coverage of coating products.
today to introduce to you how to do art paint polishing technology
Chinese
.
first to do art paint coloring needs to be used to wipe tools, flat sponges or seaweed.
flat sponge scrubbing process:
1. Grind the flat wall and roll the Canadian color horse anti-alkali acrylic paint penetration primer again.
2. Roll or spray two Canadian color horse children's acrylic paint.
3. After drying out, use a sponge to color the Canadian color horse face paint, octa-shaped or s-shaped rub to the wall, while wiping with a sponge or B8 brush to remove scratches.
4. After drying out, repeat the last step to wipe again, you can also adjust another color wipe a second time.Seaweed coloring process:
1, after handling the bottom layer, (ps: the bottom treatment with sponge wipe process, the same) with seaweed-stained Canadian color horse children acrylic paint point dragged to the wall, dot drag two pieces, when the material is not dry with B8 brush softening texture, pay attention to the joint position to be less material, joints to be left into a tooth saw.
, 2, after drying out, and then repeat the next step, the same can be adjusted another color to do the second time.
above is the art paint wipe how to explain the construction! Hope to help you understand the art paint coloring process!