Technical principle of rotary tablet press

At present, with the combination of imitation and self-made research of domestic tablet press, 33 punch rotary tablet press, single punch tablet press and basket tablet press with high speed, full process control and closed operation of automatic tablet removal have been produced, which can meet the domestic market demand and are exported to Southeast Asian countries Compared with the punching table of traditional tablet press, the important equipment maintenance advantages of the new punching table components come from the greatly reduced number of parts required, all of which are less than 15% of the original, reducing the correction link It greatly saves the cost of storage, parts management and maintenance of these parts At the same time, the use of new dynamometer components does not require further improvement of the tablet press, nor new tools, so the replacement of a new die plate does not increase the dependence of the manufacturer on the tablet press This new die plate assembly complies with EU and TSM standards, so the standard components can still be applied Both circular and irregular cavities are directly processed on the whole platen The advantages of this new structure are as follows: 1 The original structure needs 72 parts, and now only 9-15 parts are needed The number of parts is greatly reduced, and the possibility of loss is reduced; 2 The original middle die is easy to produce errors when assembling, and the middle die set screw is also a kind of easily damaged parts; 3 When changing the tablet pressing products, the speed of replacing the template is faster; 4 The improved structure cleaning is more convenient; 5 The tablet pressing speed is faster, and the effect is more obvious.