Temperature control in drying sprayer production process

The spray drying machine has good uniformity, fluidity and solubility The product has high purity and good quality The production process is simplified and the operation control is convenient The liquid with 40-60% moisture content (up to 90% of special materials) can be dried into powder products at one time After drying, there is no need to crush and screen, so as to reduce production process and improve product purity The product particle size, bulk density and moisture can be adjusted, controlled and managed by changing the operating conditions within a certain range Drying sprayer drying characteristics: fast drying speed, liquid material after atomization increased greatly than the surface, in the hot air flow, instantly can evaporate 95%-98% water, complete the drying time only need ten seconds to dozens of seconds, especially suitable for drying of heat sensitive materials The products are spherical particles with good fluidity, solubility, purity and quality The drying sprayer has a wide range of applications According to the characteristics of the material, it can be dried with hot air or granulated by cold air Simple and stable operation, convenient control, easy to achieve automatic operation The main features of the drying sprayer are as follows: 1 the drying sprayer adopts large color touch screen operation, automatic control and manual control, and ten stages of temperature control, with self memory function 2 full automatic control: one button start, set the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts automatically, the touch screen displays animation and the running process is clearly displayed When the machine is shut down, it only needs to press the stop button, and the machine automatically and safely shut down 3 Manual control: if it is necessary to adjust the process parameters during the experiment, it is convenient to switch the dynamic state, and the whole experiment process is dynamically displayed on the color touch screen (animation) 4 Shutdown protection function: just press the stop button when shutting down, the machine will stop running immediately except for the fan, to ensure that the heating part of the equipment will not be burnt out due to misoperation (forced shutdown of the fan) 5 the spray, drying and collection system is made of transparent high borosilicate heat-resistant glass material The spray drying process is carried out in a pollution-free and stable environment, and the whole spray drying process can be observed directly It provides great convenience for scientific researchers to control the experimental process and experimental results, and can solve problems in time All glass components are easy to disassemble and clean 6 the dry spray machine has an imported oil free air compressor The diameter of the powder sprayer is normal distribution, the flow is very good, and the noise is very low, less than 60dB, which is in line with the National Laboratory phonogram standard.