Textured art coating construction process.

Now texture art paint has become a trend, become the most popular coating materials, then today's small editor will take you to understand the texture of art coating construction technology.
three steps of the construction of a textured art coating: primer coating, intermediate paint, finish or texture coloring paint. Texture art coating construction technology needs to be treated well, that is, scraping putty, polishing, removing dust, brushing anti-alkali primer

.
1, grass-roots
, before the substation treatment, the wall needs a certain amount of time for maintenance. Before scraping putty, should completely remove loose, peeling, empty drum, powdered grass, and then remove dust, oil and other pollutants. Use the outer wall putty to repair the wall, the first local find flat, with putty or fill the glue to fill large holes and gaps, after the putty dry, local grinding, and then full of putty to make the grass level. After the putty is completely dry, polish it to level the base. The relief layer itself is bumpy state, the flatness of the grass-roots requirements are relatively low, can reduce the number of grinding and delicate degree. The outer wall putty for the cement system, the same need for maintenance, the general maintenance time is 14 days, until the PH value is less than 10, water content is less than 10% before the next process of construction.
2, brush closed primer
to be embossed after drying out, paint again closed primer. Closed primers generally do not need to be diluted with additional thinners. Before painting should be ground flat, clean up the dust, construction tools should be kept clean, to ensure that the closed primer is not contaminated with any pollution, without any debris. Closed primers generally choose the construction method of roller coating, which is convenient and fast.
3, applied three-dimensional texture paint
to be closed primer dry, coated three-dimensional texture paint. Generally used scraping (smearing) or spraying and other construction methods. Scratching (smearing) construction is the use of iron wipes to apply the paint evenly to the strong surface, scrape back and forth, scrape out a variety of shapes, or use special construction tools to create different shapes. According to the requirements of construction modeling, spray construction should pay attention to control product construction viscosity, air pressure, nozzle size, distance and so on. Construction should be stopped in the event of windy weather.
4, spray cover light paint
some three-dimensional coating needs to be sprayed with a layer of hood light paint, in order to form a protective layer, and further improve the decorative effect of the three-dimensional coating. The hood paint should be sprayed evenly, there should be no leakage and flow hanging phenomenon.
textured art paint construction technology, you can use any tool such as: jagged gray knife, magic gloves, all kinds of gray knife, all-around brush, wood grain, art brush, and so on, and even with many things around such as brooms, shoe brushes, cups, etc., to make their own desired shape. Paint is basically divided into two kinds, add color and reduce color, add color is added to one color and then on another or several colors, minus color is painted after; Texture paint is not static, can continue to practice, continuous learning, and constantly create new patterns and construction methods.
.