The characteristics, function and construction know-how of wood paint

The characteristics of wood paint
1, phenolic paint drying fast, high hardness, water resistance, wear resistance, but more brittle, easy to yellow.
2。 Nitro paint is wax grams, fast drying, hard paint film, wear-resistant and clear wood grain, but paint film plumpness is
in
.
3。 Alcohol paint construction is convenient, attached firmly, bright and plump.
4。 Unsaturated polyester paint has the advantage of good plumpness, fast drying speed and suitable for industrial pipeline production.
5。 Polyamine paint has excellent hardness, toughness and wear resistance, and is decorative, but contains TDI. Nano-wood paint using high-tech nanomaterials and curing agent configuration, good leveling, construction and environmental protection excellent. High solid content, effective film-forming material high, nano wood paint.
6, unit brush area is large. 3) Nano-wood primer has good filling, strong white primer cover, white paint coating film full, delicate texture, strong yellow degeneration, has been tested; varnish transparency is high, paint film transparent, 4) especially nano-wood paint degradation decoration pollution, decomposition of benzene, aldehyde, VOC and other harmful organic matter, purifying the air, and sustainable release of negative air ions, health care function and other unique properties. 5) Fort Lion Dragon nano-furniture paint specifically for the furniture industry on the special requirements of paint products targeted technology, not only to maintain the original special effects of nano-paint in anti-mold anti-mold, yellowing and paint film hardness anti-scratch performance has been greatly improved. It has been used in many iconic buildings and five-star hotels in China.
the
effect of wood paint
1, making the surface of wood material more smooth,
2, to avoid wood material directly scratched by hard objects, scratches,
3, wood paint effectively prevent moisture from seeping into the wood caused decay.
4, wood paint effectively prevent the sun from directly exposed to wood furniture caused by dry cracking.
the construction of wood
construction
know-how 1
ready. When painting, the environment and brush tools must be clean, operators should wear clean work clothes, wear clean work caps.
Tip 2
dust up in advance. First of all, the wood surface polished flat, treatment of floating ash, cleaning can be used with a special dust cloth, large areas (such as flooring) with vacuum cleaner repeated vacuuming.
know-how 3
humidity grasp. When the ambient humidity is greater than 85%, it is not appropriate to construct, otherwise it is easy to produce paint film whitening and other ills.
know-how 4
coating grasp. Brushing paint should be thin not thick, can be thin layer multi-channel; When doing multi-layer coating construction, each brush should be left to the lower layer after drying out the construction, and every time to polish.
know-how 5
vary by material. Understand the wood of wood, if it is hard wood (such as teak, birch, Bengalis) should be careful to use putty, foam water, etc. to beat the bottom so as not to cause color change and affect adhesion. Hard wood, want to get the best results, directly brush paint, if you need to fill the gap, it is recommended to use paint and fine wood powder stirring evenly to fill; If the general wood, such as the need to use transparent putty to do substrate treatment, then first with a scraper evenly scraped the entire base, should be thin should not be thick, drying should be uniform and thoroughly polished off the surface attached to the wood excess transparent putty, so as not to cause paint disease.
know-how 6
temperature-adjustable construction. When the temperature drops below 5 degrees C, the drying time is prolonged, and the low temperature will produce white fog or de-lighting phenomenon, so construction should be avoided in this case; Avoid direct sunlight or high temperature operation, the temperature is too high paint dry faster, will also produce pinholes or bubbles, so should also try to avoid high temperature construction.
wood wax oil
wood wax oil belongs to a kind of oily wood paint, wood wax oil is a commonly known vegetable oil wax coating, is a similar to paint and different from paint natural wood coating.
The principle of wood wax oil action: wood wax oil can penetrate into the wood, giving wood deep moisturizing conservation, wax can be closely combined with wood fiber, enhance surface hardness, waterproof and anti-fouling, wear-resistant, such a combination of gold to provide wood with the most excellent conservation and decorative effect.
The use of wood wax oil effect: wood wax oil can completely penetrate into the wood, so and the traditional paint with paint film in the appearance is very different, the surface is open texture effect, different wood can bring different real touch, and can be partially repaired and refurbished without leaving traces, construction is very simple, just wipe once or twice, very suitable for DIY, but also will not cause damage to the health of construction workers.
。