The common faults of automatic labeling machine and their solutions

1 The labeling machine can't produce label fault handling method 1 The position of the electronic eye is wrong Adjust the position of the electronic eye 2 The electronic eye fails Replace the electronic eye 3 The label of the labeling head is not enough Adjust the paper tightly 4 The color of the object cannot be sensed by the electronic eye Replace the electronic eye with the appropriate model and function 5 If the label feeder is not opened, the label feeder can be opened 2 Treatment methods for unstable labeling position: 1 The belt pressing device may not be pressed tightly, resulting in the loosening of the label and inaccurate electric eye detection Tighten the label 2 The traction mechanism may slip or not be compressed, which may cause the bottom paper not to be taken away smoothly Press the traction mechanism to solve the problem If it is too tight, the label will be crooked It is better to pull the base paper normally (usually if the bottom paper pulled out is wrinkled, it should be pressed too tightly.) 3 The shape or positioning of the pasted objects are different Control product quality 4 The object to be pasted shall be placed parallel to the direction of the label (pay attention to whether the product moves during the labeling process, and properly raise the left support bar a little higher than the right one) 5 The object to be pasted shall rotate smoothly on the labeling station (pay attention not to touch the stripping board) When the object is too light, the covering bar shall be put down to press the object to be pasted 6 In the double label state, the workpiece rotates all the time after the labeling machine issues a single label (1), because there is no delay set for the second label, and the machine is in the state of waiting for the second label labeling signal (2) After a single label is issued, the workpiece stops It is because of signal interference (reset the electric eye) or abnormal delay control (click two jogs 2, and then click two jogs 1).