The grinding method of the construction sealing curing agent floor

Following the epoxy flooring and wear-resistant flooring, concrete sealing curing agent flooring has been favored by more and more users in recent years. Because some factories have been watered with concrete, but hope that the ground has dust-proof, wear-resistant, pressure-resistant effect, so will choose to do sealing curing agent floor. As we all know, in order to seal the curing agent flooring to do a good job, in addition to the need to use regular manufacturers of floor materials, the most important thing is the entire construction process of the "grinding" process. But it is not the same grinding from beginning to end, sometimes need to use fine grinding, sometimes need rough grinding.
clean-up site: for locally damaged ground can be repaired, and then cleaned, to achieve a clean surface without dust. Apply evenly to the surface of the floor using a sealing curing agent so that it fully penetrates the ground. Wash excess material on the ground with water before the material is dried (1-2 hours, depending on weather conditions).Foundation Polishing: After drying the concrete floor (generally 24-48 hours depending on the weather temperature and ventilation), use professional cutting machinery, install 500 polishing sheets for comprehensive polishing, clean up the ground debris. A further 1000-1500 eye polishing tablets (depending on the basic conditions) are used for a full polishing of 1-2 sides, so that the ground has a certain finish. Finally, clean up the debris produced during the polishing process.
。