echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > The maintenance of the heating and melting oven of the raw material barrel is mainly carried out from two aspects

    The maintenance of the heating and melting oven of the raw material barrel is mainly carried out from two aspects

    • Last Update: 2022-08-21
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    The main principle of the raw material barrel heating and melting oven is to use electric heating or steam heating to generate heat
    .

    Since the box is in a closed state, heating pipes or steam radiators are placed on both sides of the equipment air duct
    .

    Then, the circulating fan at the top generates a large amount of flowing air driven by the wind wheel
    .

    Under the action of the wind deflector, it enters the air ducts on both sides
    .

    The generated hot air blows through all corners of the box, and also blows through the oil barrels and chemical barrels in the box, generating heat to melt and thaw the materials in the chemical raw material oil barrels
    .

    We mainly carry out its maintenance from two aspects: 1.
    Maintenance of the box 1.
    Clean the surface of the box with a soft cloth to keep the surface of the oven clean and prevent the surface from peeling and affecting the appearance
    .

    2.
    The workshop should also be wiped frequently to prevent corrosive substances from adhering to the liner and affecting the service life
    .

    3.
    Regularly check whether the ventilation openings are blocked, and clean the accumulated dust regularly to ensure smooth air supply in the air duct
    .

    4.
    Regularly check whether the latch is locked
    .

    If loose, it needs to be replaced to ensure confidentiality
    .

        5.
    Regularly check whether the fan is running normally and whether there is any abnormal noise
    .

    If so, please stop the machine immediately to check, so as not to burn out the circulating fan
    .

        2.
    Maintenance of electric control box of heating and melting oven for raw material
    barrels
        2.
    Regularly check whether the thermostat is accurate
    .

    If not, adjust the thermostat's static compensation or sensor calibration value or replace the thermostat
    .

        3.
    In case of a sudden power failure, please turn off the power switch to prevent the power failure from automatically turning on
    .

        Raw material barrel heating and melting oven is a professional equipment specially designed for raw material heating and preheating
    .

    The equipment is equipped with temperature control system, air circulation system and alarm system, which can achieve the purpose of accurate temperature control, uniform temperature and safety protection during the heating process of raw materials
    .

    Hot air circulates in the drying room, with high thermal efficiency and energy saving
    .

    The forced ventilation function is used to set up air ducts in the oven to preheat the raw materials evenly
    .

    The drying room runs stably, the temperature is automatically controlled, and the installation and maintenance are convenient
    .

    The equipment can choose Q235 cold-rolled steel plate, galvanized steel plate and stainless steel plate according to customer requirements and raw material characteristics
    .

    The equipment can be designed and produced according to the requirements of the production environment, and the equipment can be designed and produced according to the requirements of the heat source
    .

    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.