The mold temperature machine manufacturer will take you to understand how the mold temperature machine needs to be maintained and used

The mold temperature machine manufacturer will show you how to maintain and use the mold temperature machine.
After purchasing the mold temperature machine, we must maintain it well.
Only in this way can we give the machine a good working condition and prolong the life of the machine application
.

What should we do in the daily application of the mold temperature machine? The mold temperature machine manufacturer will briefly explain to you: 1.
After purchasing a new mold temperature machine, we must keep the working condition of the mold temperature machine clean and avoid dust, which can greatly extend the service life of the electrical components of the mold temperature machine
.

2.
For the new mold temperature machine, the mold temperature machine manufacturer recommends that different maintenance measures should be taken according to the heat transfer medium used
.

For the medium is water, we need to keep the water source clean, so that it is not easy to scale, and it can also prevent the pipeline from being blocked
.

For the medium that is oil, we need to replace it regularly according to the application temperature.
For the medium above 200°C, we need to replace it once a month or two, and for the following, we can replace it once a quarter or so, which is very easy to avoid.
The embarrassment that the temperature can't be added
.

3.
In terms of pipeline, we need to check whether the pipeline is blocked according to the relationship between the pump and the pressure.
If the pressure is too low, we can take out the fever tube and clear it with the object
.

For the filter, we need to replace it regularly, which can refer to Article 2
.

4.
On the electrical components, we can replace them according to the service life of the components, and test them regularly to ensure safety
.


Label: