The new national standard for the adhesive industry began to be implemented on April 1st

The promulgation and implementation of national standards and industry standards is a major event related to the development of the industry.
In recent years, with the rapid development of my country's adhesive and adhesive tape industries and the advancement of trade liberalization in the world, companies have increasingly paid attention to and paid close attention to the new standards introduced by the industry.
In order to enable the entire industry to grasp and follow up on the new progress of various standards work, the editor has collected and sorted out a number of recent announcements, focusing on interpreting for everyone the my country adhesive and adhesive tape industry will be implemented on April 1, 2019.
A batch of national standards and industry standards.

The promulgation and implementation of national standards and industry standards is a major event related to the development of the industry.
In recent years, with the rapid development of my country's adhesive and adhesive tape industries and the advancement of trade liberalization in the world, companies have increasingly paid attention to and paid close attention to the new standards introduced by the industry.
In order to enable the entire industry to grasp and follow up on the new progress of various standards work, the editor has collected and sorted out a number of recent announcements, focusing on interpreting for everyone the my country adhesive and adhesive tape industry will be implemented on April 1, 2019.
A batch of national standards and industry standards.
The promulgation and implementation of national standards and industry standards is a major event related to the development of the industry.
In recent years, with the rapid development of my country's adhesive and adhesive tape industries and the advancement of trade liberalization in the world, companies have increasingly paid attention to and paid close attention to the new standards introduced by the industry.
In order to enable the entire industry to grasp and follow up on the new progress of various standards work, the editor has collected and sorted out a number of recent announcements, focusing on interpreting for everyone the my country adhesive and adhesive tape industry will be implemented on April 1, 2019.
A batch of national standards and industry standards.

 

Six newly implemented national standards

 

Six newly implemented national standards

Six newly implemented national standards

Six newly implemented national standards

Six newly implemented national standards

Six newly implemented national standards Six newly implemented national standards

1.
GB/T 36797—2018 Epoxy resin joint glue for decoration anti-cracking

1.
GB/T 36797-2018 epoxy resin joint glue for anti-cracking decoration 1.
GB/T 36797-2018 epoxy resin joint glue for anti-cracking decoration

This standard specifies the terms and definitions, product classification and marking, requirements, test preparation, test methods, inspection rules and packaging, marking, marking, transportation, and storage of epoxy resin joint glue for decoration anti-cracking.
Solvent-free jointing adhesive products for interior decoration and decoration composed of oxygen resin (component A) and amine curing agent (component B).

This standard specifies the terms and definitions, product classification and marking, requirements, test preparation, test methods, inspection rules and packaging, marking, marking, transportation, and storage of epoxy resin joint glue for decoration anti-cracking.
Solvent-free jointing adhesive products for interior decoration and decoration composed of oxygen resin (component A) and amine curing agent (component B).
This standard specifies the terms and definitions, product classification and marking, requirements, test preparation, test methods, inspection rules and packaging, marking, marking, transportation, and storage of epoxy resin joint glue for decoration anti-cracking.
Solvent-free jointing adhesive products for interior decoration and decoration composed of oxygen resin (component A) and amine curing agent (component B).

2.
GB/T 36799-2018 Determination of VOC emissions from adhesives Micro-cabin method

2.
GB/T 36799-2018 Determination of VOC Emissions from Adhesives Micro-cabin Method 2.
GB/T 36799-2018 Determination of VOCs Emissions from Adhesives Micro-cabin Method

This standard specifies the rapid qualitative and semi-quantitative determination of gas-phase organic compounds (volatile and semi-volatile) in adhesive products by the micro-cabin method, which is suitable for the specified area (or mass) of the release of volatile organic compounds in the adhesive.
Quick check.

This standard specifies the rapid qualitative and semi-quantitative determination of gas phase organic compounds (volatile and semi-volatile) in adhesive products using the micro-cabin method, which is suitable for the specified area (or mass) of the release of volatile organic compounds in the adhesive.
Quick check.
This standard specifies the rapid qualitative and semi-quantitative determination of gas phase organic compounds (volatile and semi-volatile) in adhesive products using the micro-cabin method, which is suitable for the specified area (or mass) of the release of volatile organic compounds in the adhesive.
Quick check.

3.
GB/T 36802—2018 Adhesives for solar photovoltaic backplane laminating

3.
GB/T 36802—2018 Adhesives for solar photovoltaic backplane laminating 3.
GB/T 36802—2018 Adhesives for solar photovoltaic backplane laminating

This standard specifies the terms and definitions, classification, requirements, state adjustment, test preparation, aging conditions, test methods, inspection rules, signs, packaging, transportation and storage of adhesives for solar photovoltaic backsheets.
It is suitable for solar backsheet composites.
Adhesive for bonding.

This standard specifies the terms and definitions, classification, requirements, state adjustment, test preparation, aging conditions, test methods, inspection rules, signs, packaging, transportation and storage of adhesives for solar photovoltaic backsheets.
It is suitable for solar backsheet composites.
Adhesive for bonding.
This standard specifies the terms and definitions, classification, requirements, state adjustment, test preparation, aging conditions, test methods, inspection rules, signs, packaging, transportation and storage of adhesives for solar photovoltaic backsheets.
It is suitable for solar backsheet composites.
Adhesive for bonding.

4.
GB/T 36803-2018 Determination of VOC release from adhesives, bag method

4.
GB/T 36803-2018 Determination of VOC Emissions from Adhesives Bag Method 4.
GB/T 36803-2018 Determination of VOCs Emissions from Adhesives Bag Method

This standard specifies the bag method to determine the release of volatile organic compounds (VOC), formaldehyde and other carbonyl compounds in adhesive products.
It is suitable for measuring non-polar and weak poles between n-C6 and n-C16.
The emission of volatile organic compounds (coating emission and residual emission).
The measured concentrations of VOCs, formaldehyde and other carbonyl compounds ranged from μg/m3 to mg/m3.

This standard specifies the bag method to determine the release of volatile organic compounds (VOC), formaldehyde and other carbonyl compounds in adhesive products.
It is suitable for measuring non-polar and weak poles between n-C6 and n-C16.
The emission of volatile organic compounds (coating emission and residual emission).
The measured concentrations of VOCs, formaldehyde and other carbonyl compounds ranged from μg/m3 to mg/m3.
This standard specifies the bag method to determine the release of volatile organic compounds (VOC), formaldehyde and other carbonyl compounds in adhesive products.
It is suitable for measuring non-polar and weak poles between n-C6 and n-C16.
The emission of volatile organic compounds (coating emission and residual emission).
The measured concentrations of VOCs, formaldehyde and other carbonyl compounds ranged from μg/m3 to mg/m3.

5.
GB/T 36877—2018 Determination of Impact Peel Strength of Structural Adhesives Wedge Method

5.
GB/T 36877-2018 Determination of Impact Peel Strength of Structural Adhesives Wedge Method 5.
GB/T 36877-2018 Determination of Impact Peel Strength of Structural Adhesives Wedge Method

This standard specifies the test method for measuring the impact peel strength of structural adhesives using the wedge method.
It is applicable to the determination of the impact peel strength of bonded specimens composed of metal and metal, and metal and non-metal.

This standard specifies the test method for measuring the impact peel strength of structural adhesives using the wedge method.
It is applicable to the determination of the impact peel strength of bonded specimens composed of metal and metal, and metal and non-metal.
This standard specifies the test method for measuring the impact peel strength of structural adhesives using the wedge method.
It is applicable to the determination of the impact peel strength of bonded specimens composed of metal and metal, and metal and non-metal.

6.
GB/T 36878—2018 Determination of tear strength of sealant

6.
GB/T 36878-2018 Determination of the tearing strength of sealants 6.
GB/T 36878-2018 Determination of the tearing strength of sealants

This standard specifies the test method for the tear strength of sealants, which is suitable for the characterization and determination of the tear strength of sealants.

This standard specifies the method for the determination of the tear strength of sealants, which is suitable for the characterization and determination of the tear strength of sealants.
This standard specifies the test method for the tear strength of sealants, which is suitable for the characterization and determination of the tear strength of sealants.

Ten newly implemented industry standards

Ten newly implemented industry standards

Ten newly implemented industry standards

1.

HG/T 2492—2018 α-ethyl cyanoacrylate instant adhesive

1.
HG/T 2492—2018 α-ethyl cyanoacrylate instant adhesive1 , HG/T 2492—2018 α-ethyl cyanoacrylate instant adhesive

This standard specifies the technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of α-ethyl cyanoacrylate instant adhesives.

It is suitable for instant curing solvent-free with ethyl cyanoacrylate as the main component.

This standard specifies the technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of α-ethyl cyanoacrylate instant adhesives.

2.

This standard specifies the requirements, test methods, inspection rules, packaging, marking, transportation and storage of natural rubber adhesives for fiber fabrics and leather.

3.

This standard specifies the classification, requirements, test methods, inspection rules, signs, packaging, transportation and storage of double-sided pressure-sensitive adhesive tapes.

4.

This standard specifies the use, characteristics, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage of anaerobic adhesives, and is applicable to anaerobic adhesive products and their quality management.

5.

This standard specifies the method for the determination of acrylamide content in water-based adhesives by gas chromatography, and is suitable for the determination of residual monomer content of acrylamide in water-based adhesives.

6.

This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements of two-component polyurethane adhesives for composite flexible packaging.

7.

This standard specifies the classification, terms and definitions, requirements, test methods, inspection rules, packaging, marking, transportation and storage of ethylene-vinyl acetate copolymer (EVA) film.

8.
HG/T 5378—2018 organic silicon flat sealant 8.
HG/T 5378—2018 organic silicon flat sealant

This standard specifies the terms and definitions, general requirements, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage of silicone flat sealants.
It is suitable for the sealing of various mechanical equipment parts in the field of automobiles and internal combustion engines.
.

This standard specifies the terms and definitions, general requirements, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage of silicone flat sealants.
It is suitable for the sealing of various mechanical equipment parts in the field of automobiles and internal combustion engines.
.
This standard specifies the terms and definitions, general requirements, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage of silicone flat sealants.
It is suitable for the sealing of various mechanical equipment parts in the field of automobiles and internal combustion engines.
.

9.
HG/T 5379—2018 Silicone sealant for electrical appliances

9.
HG/T 5379—2018 Silicone Sealant for Electrical Appliances 9.
HG/T 5379—2018 Silicone Sealant for Electrical Appliances

This standard specifies the classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage requirements of silicone sealants for electrical appliances.
It is applicable to polyorganosiloxane as the base polymer with appropriate additives.
A formulated silicone sealant used in the electronics and electrical industries.

This standard specifies the classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage requirements of silicone sealants for electrical appliances.
It is applicable to polyorganosiloxane as the base polymer with appropriate additives.
A formulated silicone sealant used in the electronics and electrical industries.
This standard specifies the classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage requirements of silicone sealants for electrical appliances.
It is applicable to polyorganosiloxane as the base polymer with appropriate additives.
A formulated silicone sealant used in the electronics and electrical industries.

10.
HG/T 5380—2018 hot melt adhesive for shoes

10.
HG/T 5380—2018 hot melt adhesive for shoes 10.
HG/T 5380—2018 hot melt adhesive for shoes

This standard specifies the classification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of hot-melt adhesives for shoes, and is suitable for shoe-making processes and hot-melt adhesives for shoe materials.

This standard specifies the classification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of hot-melt adhesives for shoes, and is suitable for shoe-making processes and hot-melt adhesives for shoe materials.
This standard specifies the classification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of hot-melt adhesives for shoes, and is suitable for shoe-making processes and hot-melt adhesives for shoe materials.