The power of plastic defoamer, do you know?

The power of microplastic defoamer is reflected in its function and is widely us.

A small amount of water contained in plastic raw materials, if not eliminated, will form bubbles or water marks on the surface of the product, which will have a fatal impact on the strength and appearance of the produ.

However, the traditional process of using electric heating drying machinery to eliminate moisture has shortcomings such as prolonged product processing time (one drying equipment takes about 15 hours to dry 1 ton of raw materials), raw material weight loss, high power consumption, e.

"Plastic Defoamer" is a new type of functional masterbatch specially developed to solve the problem of bliste.

Plastic defoamer, also known as plastic water remover, plastic moisture-absorbing masterbatch, plastic dehumidifier, plastic desiccant, is a domestic first technolo.

Water absorption function: can absorb water equivalent to 20% of its own weight

Processing function: ordinary equipment can be used, and the processing technology does not need to be changed

Appearance: gray-white particles, good plasticization, uniform particle size without continuous particles

Ideal additive: non-toxic, non-irritating, non-irritating gas release

0 Product application

Widely used in PP, PE, PS, ABS, LDPE, HDPE recycled materials, damp materials and degradable plastics for blown film, sheet, sheet, extrusion, injection molding, blow molding, bottle blowing, weaving and other processing to ensure product quality and yield, reduce energy consumption and improve productivi.

0 How to use

The plastic defoamer is mixed according to the weight percentage of the raw materials, 2-3% for blown film products; 4-8% for injection molding products; after mixing evenly, the products can be processed direct.

Recommended best method of use: mix now, use n.

- -Precautions- -

The product has strong water absorpti.

         It is best to use it within 24 hours after mixing with the raw materia.

         Before the processing of the product, do not dry the raw material or the product, so as not to cause the product to fail and cause the net to be block.