The prefabricated building will develop in an all-round way, and it cannot be escorted without the industrial endoscope

One of the important testing links is a link that cannot be ignored in prefabricated buildings.
This is the grouting sleeve fullness testing technology, which directly relates to the strength of the direct connection of building components, which in turn affects the quality level and even safety of the entire building
.
The grouting sleeve connects different components together, and there are special concrete and steel anchors in the sleeve.
The compactness of the grouting in the sleeve and the length of the anchored steel bars have very strict requirements
.

High demands on quality,

Means high standards for testing

Industrial endoscope as an effective and rapid means of detection began widely recognized by the majority detection unit, general industrial endoscope with a measuring function is the most basic requirement for such testing
.
Olympus’s IPLEX NX endoscope relies on high-definition image quality and unique 3D laser technology, not only can quickly get a clear picture of the detection position, but also can obtain the filling level to the depth of the insertion hole with zero delay for 3D The construction of the point cloud diagram allows everyone to obtain more intuitive and convincing inspection data, avoid the drawbacks of grouting fullness and cannot be measured quantitatively, and quantitatively and reliably understand the insertion depth of the steel bar
.

In addition to depth measurement, the IPLEX  NX series of endoscopes also has a function specifically set for grouting fullness, that is, five-point real-time object distance measurement technology
.
When the inspector places the insertion tube in any position, the real-time height of the front end of the camera from the inspected position can be obtained without delay, and there are at least five points.
By tapping the screen, you can also get any other five points in the visible range.
Object distance, this function can quickly understand whether the grouting level meets the engineering requirements.
At present, this technology basically replaces other methods of measurement technology or other 3D scanning technology
.

In the inspection process of prefabricated buildings, the advantages of the five-point real-time object distance technology are very obvious: fast reading, comprehensive measurement, reliable data, and durable equipment
.

The following are some samples during the test:

Swipe left and right to view

Industrial endoscopes are not only useful in prefabricated buildings, but can also be used in antique building restoration, curtain wall keel inspection, water supply and drainage pipes, bridge cables and other places.
Most of the invisible and need to be inspected locations are in the industry.
Looking glass
.

For complex and difficult-to-explorer buildings, industrial endoscopes are undoubtedly one of the most efficient and accurate detection equipment
.

Need to order and demonstrate?

If you need to order or demonstrate the Olympus IPLEX series video endoscopes , please visit the following webpage to find the contact information: or you can also call our phone: 400- 969-0456

Please pay attention to our WeChat video account: