The preparation process and equipment of hand-cleaning-free gel.

Sopen title: Washing hand disinfection gel preparation process and equipment Whether it is like the special circumstances of this outbreak or people's normal life, hand hygiene has been emphasized, even in many foreign countries / home, many people would rather wash their hands than wear masks, although this is a wrong idea, but also can see the importance of hand hygiene, to convey to everyone hand disinfection is the elimination of germs, bacteria, the most important, / easy measures. Especially during this outbreak, but simply hand washing does not completely remove pathogenic microorganisms. Therefore, a suitable hand disinfectant is required for thorough disinfection. Since many disinfectants are water dosage forms, its droplets are prone to splashing, dripping and may cause irritation or other side effects on the skin of the rival department, and should not be used for long periods of time. And wash-free disinfection gel its droplets are a bit gel-like, after the use of the hand feel refreshing moisturizing, so this is also many enterprises, hospitals, schools and other public places and home out of the commonly used hand disinfection products. After the outbreak, people's health concept of the promotion, as well as the escalation of foreign outbreaks, hand-washing disinfection gel market can be available!compared with water disinfectant hand disinfectant, disinfection gel can effectively prevent the spray and drip of disinfectant, with drip-free, easy to use, fast drying and so on. And stable performance, high efficiency and rapid disinfection, water-free washing environmental protection, gel-like, after the use of a refreshing feel not sticky and so on. In general, the disinfection gel production process is simple., raw material ratioethanol 45-78, propylene alcohol 7-15, dichlorooxyphenol 0.02-0.08, deionized water 16-40, thickener 0.2-0.8 parts, neutralization agent 0.3-1.1. This formula is wash-free disinfection gel for weak acidic formula, close to the skin pH, can effectively protect the skin of the hands;, preparation method 1, the thickener powder slowly dispersed on the surface of deionizing water, soaked for 40-60 hours to completely dissolve;2, the use of ethanol dissolved dichlorooxyphenol, made into dichlorooxychlorophenol ethanol solution;3, the ethanol, propylene alcohol, dichlorooxychlorol ethanol solution in the stainless steel mixing tank, stirring evenly, and then add step one thickener solution, and then add deionized water, stirring evenly;4, add a medium-conditioning agent to adjust the pH of 5-7, to make hands-free disinfection gel.3rd, wash-free disinfection gel production equipment Ike stainless steel dispersed emulsification tank using sanitary grade 304 or 316L stainless steel material, the tank for mirror polishing, convenient cleaning. Stainless steel dispersed emulsification tank by mixing tank, mixing tank cover, agitator, support, transmission, shaft sealing device, etc. , can be added to heating, cooling, vacuum and other devices. Mixing tank and mixing tank cover can be inlet, material, observation, temperature measurement, pressure measurement, steam fractionation, safe emptying and other process pipe holes according to process requirements.
. Responsible editor:
.