-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Oil and water separators are also called condensers, and some main plants are called "compressed air oil and water separators".
is a line of defense to ensure clean compressed air in the brake system, and oil and water mixtures and impurities can seriously affect the performance of the brake system and the life of components.
for the country four, country five models, many host plants are oil and water separators as standard.
oil and water separator works: compressed air flows from the side air intakes into the spiral pipe.
Inside the oil-water separator, compressed air flows in a downward spiral space and, under centrifural force, leaves the oil-water mixture and impurities on the drainboard, which flows through a vertical channel and through the air outlet at the top.
oil-water mixtures and impurities that condense on the conductor and flowlots flow down the downward spiral tube into the bottom collector under the force of gravity.
for the electronically controlled oil and water separator, the lower part of which is the electronically controlled automatic discharge valve.
when the drain valve is activated, the oil-water mixture and impurities in the bottom collector will be discharged.
the electric control automatic discharge valve through the timed relay or brake light power control, for the air-controlled oil and water separator, the lower part of the air-controlled automatic water release valve.
the regular maintenance interval of the oil and water separator is mainly based on the working environment of the oil and water separator.
if an abnormal operation is found in the vehicle, immediate inspection and repair is required.
For gas leakage caused by carbon or oil contamination, the inside of the aluminum housing of the oil and water separator needs to be cleaned regularly, and other components can be cleaned or replaced according to the actual situation.
.