The requirements of the placement of the high and low temperature test chamber on the position

The placement of the high and low temperature test chamber is exquisite, and the position is not placed well, which will be affected during the test process and later maintenance, which is not exaggerated
at all.

Let's take a look at what special requirements the high and low temperature test chamber has for the placement of the
position.

1, should be placed on the horizontal ground, if the placement is unstable may make the test chamber noise 2, the equipment should be placed away from the heat source, avoid direct sunlight, conducive to ventilation 3, the equipment around the should be free of magnetic field and electromagnetic radiation 4, the high and low temperature test chamber used power supply for AC380V±10% 50± 0.
5Hz three-phase five-wire system, requiring the user to install the high and low temperature test chamber with the corresponding capacity of air or power switch, and this switch must be used independently for the equipment
。
5, the equipment should be far away from flammable, explosive and corrosive materials 6, when placed should be around the high and low temperature test chamber should be left around the appropriate use and maintenance space 7, high and low temperature test chamber installation site should not be sharp temperature changes