echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > The spraying process of deep processing of glass bottles is explained in detail

    The spraying process of deep processing of glass bottles is explained in detail

    • Last Update: 2020-03-25
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com

    spray production line generally has a spray room, hanging chain and oven compositionGlass bottles are also the front road water treatment, glass bottles in particular need to pay attention to the sewage discharge problemAs for the glass bottle and tank spray quality, that is related to water treatment, workpiece surface cleaning, hook conductivity, the size of the gas volume, the amount of powder spray, the level of the operatorIt is recommended to choose the following methods to be tried on a trial:1, pre-processing segmentGlass bottle before spraying treatment section includes pre-removal, main unremoval, table tone, etc, if in the north, the temperature of the main unreleased part can not be too low, need to keep warmOtherwise, the processing effect is not ideal,2, warm-up segmentAfter pre-treatment to enter the warm-up section, generally need 8-10 minutes, glass bottles best to reach the powder chamber to make the spray parts have a certain residual heat, in order to increase the adhesion of powder; If the process requirements of the spray edihours are relatively high, this segment is essential, otherwise if the workpiece adsorption there is a lot of dust, after processing the workpiece surface will have a lot of particles, so that the quality is reduced; The most critical part is the technical problems of the powder master, in order to create good quality, spend money to ask the good techmaster is still very well-made; This section should pay attention to the temperature and baking time, powder generally 180-200 degrees is good, specifically depends on the material of the workpieceThere is a drying furnace from the powder booth should not be too far, generally 6 meters for good
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.