The use and maintenance of fully automatic and efficient mixers

Fully automatic and efficient mixer at one end is equipped with a motor and reducer, motor power through the belt to the reducer, the gearbox and then through the coupling to the V-barrel, so that the V-type barrel continuous operation, driving the barrel material in the barrel up, down, left and right to mix.
the machine's mixing barrel structure is unique, even mixing, high efficiency, no accumulation of materials.
the whole machine structure is simple and easy to operate.
surface and material contact parts are made of stainless steel, beautiful shape, maintenance, cleaning convenience.
is suitable for the mixture of dry powdered and granular materials in pharmaceutical, chemical and food products.
The following small editor briefly introduce the use and maintenance methods of fully automatic high-efficiency mixer, as follows: 1, installation: the machine will be placed smoothly, installed feet, mat flat, so that the machine can run freely.
2, before use will have to refuel the oil, and then carry out empty load operation, check whether the fasteners are loose, electrical is normal, machinery is operating normally, if there is an abnormal, repair and commissioning.
3, the feeding port to the above, open the feeding cover for feeding, the amount of feeding can not exceed the prescribed volume, and then close the feeding cap, start the machine to run, if found abnormal, must stop inspection.
4, after-hours or changing varieties must be flushed inside and outside the thymnel.
through the above content, small editor hope to understand the fully automatic and efficient mixer is helpful.