The use method and characteristics of high-speed oral liquid filling machine

The Shanghai Shenggang automatic high-speed oral liquid filling machine is equipped with a progressive edge mesh belt to feed the bottle, a large-diameter slow-speed bottle disc with a stainless steel pump for tracking filling, a simple capping tube and oscillator, and 12-head filling.
It consists of 10 heads sealing, 4 knives rolling thread tracking capping, roller type bottle collecting device and so on
.

The whole machine adopts touch screen full Chinese menu dynamic display, PLC control, man-machine interface operation, variable frequency stepless speed regulation; it also has functions such as no bottle capping, no capping and other functions
.

How to use the high-speed oral liquid filling machine: 1.
When the filling position is not turned on, pull out the stopper needle, take the bottle to be filled, and place it under the filling head to adjust the positioning so that the filling head is aligned with each other.
Align the center of the bottle mouth, and adjust the guardrail on the conveyor belt at the same time to further adjust the position of the bottle
.

2.
Adjust the height of the filling head.
After the filling head is aligned with the center position, mobilize the lifting shaker and extend the standard CM into the bottle, that is, adjust the height of the filling head when it is lowered
.

3.
The speed of the conveyor belt is fixed.
According to the size of the bottle and the relative speed of the needle, it is adjusted so that the bottle just conveyed does not touch the standard needle
.

 　　4.
The photoelectric switch is controlled and adjusted, adjust the photoelectric switch left and right, translate, and adjust the position of the photoelectric switch according to the fixed position of the stopper, so that it just recognizes the edge of the empty bottle body, so as not to disturb the bottle that has just been delivered.
The photoelectric switch recognizes the function of counting
.


Features of high-speed oral liquid filling machine: 1.
The equipment is fully automatic and uniform
.

The glass bottle transmission and positioning device is accurate and reliable, and the bottle is not broken during high-speed operation, and it is convenient to replace and clean
.

The speed of bottle feeding, filling and bottle feeding can be adjusted by stepless frequency conversion and each speed can be coordinated with each other according to the filling speed
.

 　　2.
The exposed parts of the equipment are made of 304 stainless steel, and the parts in contact with the liquid are made of 316L stainless steel or ceramic, silica gel and other materials
.

All plastic parts such as dials, fences, etc.
are made of polyoxymethylene material
.

 　　3.
The filling adopts stainless steel metering pump, the filling pipeline system does not leak, and the actions of each process are coordinated, accurate and reliable
.

The filling pipeline system has no dead ends, blind pipes, and is easy to clean and sterilize, and each connection part adopts the quick installation method
.

 　　4.
The vibration plate and track of the aluminum cover are made of stainless steel (304), which can be easily disassembled and sterilized
.

The lid-arranging vibration station can be quickly disassembled and assembled, and can be sterilized
.

 　　5.
The four-blade flexible capping head is used for capping, the positioning center is correct, the rolled bottle is beautiful and tight, the aluminum cap is correct, there is no false lock, warped edge, and crooked cap, and the locking part is smooth, flat, and free of burrs.
, gaps, folds, no rotation of the aluminum cover, with the function of no bottle cap, no capping, to meet the product qualification rate and meet the requirements, and improve the quality of the product
.

 　　6.
The table top of the whole machine is sealed and no waste liquid penetrates into the equipment.
The table side water collection tank is more convenient to clean, has no dead angle and is easy to clean, and is equipped with a centralized collection port and a diversion nozzle
.

 　　7.
The equipment adopts high-precision color touch screen for operation monitoring, PLC automatic control, and host frequency conversion speed regulation
.

It can implement electromechanical integration for the control and protection of the main drive system, the bottle in and out system, the monitoring of the entire system and the mutual control connection with the back channel
.

 　　8.
This machine can be used alone, or it can be combined with washing machine, tunnel oven, etc.
to form a washing, drying and filling line to realize full automation of the production process
.