-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
With the development of society, people's home requirements are getting higher and higher, wood home because of its environmental protection, beautiful performance and widely welcomed by Chinese families, in order to ensure the long-term use of wood furniture, generally will be painted with a layer of wood paint, then, how should this kind of decorative protection products be painted construction?What many people do not know is that water-based wood paint including wood decoration paint, furniture paint and floor paint three products, water-based wood paint, only semi-finished products, must go through a construction process, until the substrate film and produce decorative effect, can become a finished product. DOWAY Dewey paint tells you that its ideal decorative effect depends not only on the excellent performance of the water-based wood paint itself, but also on reasonable product supporting construction, excellent construction technology, and standardized operation under appropriate environmental conditions. At the same time good substrate treatment, strict construction and control is to achieve high-quality engineering guarantee.1, substrate treatment
wood material moisture content is higher than 12%, when the hand touch has a damp feeling is not able to construct. Wood substrate must be clean, flat, can not retain oil, glue and other impurities, such as oil can be used to remove water.
2, woodworking before the substrate treatment
using primer or varnish primer to close, (primer closed before removing surface dust, stains, especially glue.) Then carry out the construction) treatment, and then carpentry into the field construction.
3, scraping putty
in the treatment of the substrate, if the surface is rough, you need to scrape 1-3 times transparent putty, interval 2-3 hours, scraping uniform flat layer between no grinding, dry through. Scraping putty can also be arranged before carpentry is completed or after carpentry is completed. Putty does not need to be diluted, generally should be after a primer, scraping better.paint primer: brush 2-3 times the primer interval of 4-5 hours, each time after good drying (depending on humidity and climate conditions), with 800 s sandpaper polishing, primer with 10-20% water dilution.
paint: paint 2-3 times, interval 4-5 hours, each time after drying with more than 800 s sandpaper lightly polished.
4, polishing
wood before painting water-based paint, has been painted oily primer, the paint base needs to be polished, generally using 360 sandpaper polishing, remove dust, can be painted water-based primer, otherwise it will affect the adhesion of the paint film.
5, clean
construction paint primer, for a part of the rougher substrate, should first use 360-400 sandpaper sanding substrate, remove the sanding dust, before painting the primer, otherwise it will affect the future construction effect, dust has entered the wood grain can be removed by brush or humidity clean towel, cloth to suck it out.
。