-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
First, instant bonding
instant adhesive use does not need heating, pressurization, with fast curing, bonding strength characteristics. A 6.45-square-centimeter bonding surface can withstand enough pull to lift a car. Such adhesives play a great role in promoting continuous production lines
.
2. Bonding of structural parts
The bonding of structural parts refers to the bonding of structural parts such as buildings, vehicles, ships, aircraft, space vehicles, etc., which can withstand long-term loads and large stresses. Increase the speed; At the same time, the surface of the bonding part is smooth and smooth, which is conducive to navigation; It also has sealing, corrosion protection and other properties.
Thy, liquid seal leakage
some adhesive at room temperature is a fluid liquid, applied to a variety of connections or need to seal the part, the formation of a flexible layer of glue, can replace the usual gaskets, play a sealing role.
4. Underwater bonding
is reflected in the construction of dams or bridges, shipbuilding and defense industries, which can connect prefabriced parts on land with components in water and underwater, thus greatly simplifying the construction process and speeding up the construction process.
5, hot-melt bonding
hot-melt adhesive is a solid, it must be heated and melted into fluid before adhesive, bonding cooled back to solid, forming a solid bond. Hot-melt adhesives are made from thermoplastic polymers with adhesives, etc.
, oil surface bonding
oil surface glue does not need to first remove oil on the surface, simplify the process, and have a good bonding strength.
, high temperature bonding and ultra-low temperature bonding
the general adhesive can withstand temperatures below 100 degrees C. Inorbic adhesives can withstand about 600 degrees C, of which ceramic adhesives are the best, can withstand high temperatures of 1300 degrees C. Ultra-low temperature adhesives maintain high strength and toughness at -196 degrees C or even lower temperatures of -269 degrees C.
, pressure-sensitive bonding
this product is used for the paste of commodity labels, the sealing of cartons, the strapping of harnesses and the protection of the surface of high-gloss metal plates.
, medical bonding,
adhesive has become an indispensable new material for medical treatment. For example, bonding of the kidneys, joints of blood vessels, matching wounds, esophageal or bile vessels, dental bonding and repair, bone connections, etc. can play a very good role.
, conductive bonding of electronic device leads
in addition, there is conductive bonding for electronic device leads, there are conductive glues with silver powder as conductors. High-transparency optical glass glue for optical glass bonding and light-sensitive photosensitive curing adhesives and electron beam curing adhesives.