Two heating methods for carbon dioxide culture tanks

The two heating methods of CO2 culture box CO2 culture tank is an experimental instrument for cell, tissue and bacterial culture.
CO2 culture box is designed with a flow-type arc, the housing is made of cold-rolled steel plate, the surface electrostectrical spray molding, the inner bile is made of stainless steel material, and the semi-circular four-corner design makes cleaning easier.
microcomputer temperature controller, the temperature fluctuations are small, the box is equipped with ultraviolet sterilization lamp can be regularly UV disinfection of the box, thus more to prevent contamination during cell culture.
Below, we introduce two ways of heating the CO2 culture tank: water cover heating is to maintain a constant temperature through a separate water sleeve layer surrounding the inner box, the advantages of which are: water is a very good insothermal substance, when the power is cut off, water The casing system can maintain the temperature accuracy and stability of the culture box for a long time (the temperature is 3-4 times that of the gas sleeve system), which is beneficial to the user selection of the experimental environment which is not stable (if there is electricity restriction, or frequent power failure) and needs to maintain the long-term stable training conditions.
gas sleeve heating is directly heated to the inner box by a heater spread throughout the tank gas sleeve layer, also known as six-sided direct heating.
, compared with the water sleeve type, it has the characteristics of fast heating and temperature recovery faster than the water sleeve culture tank, which is conducive to short-term cultivation and the cultivation of frequent switch of the box door.
In addition, the gas sleeve design is simpler for the user than the water sleeve (the water sleeve type requires water tank to be watered, emptied and cleaned, and the operation of the water tank should be monitored frequently)