Use method of clean sampling vehicle and use matters of clean sampling vehicle

Move the clean sampling car to the place where the sampling car is needed, fix the sampling car, connect the power supply, turn on the power supply and fan switch, the fan starts to work, adjust the voltage (generally 220V), and put it into the sampling barrel after the sampling car runs for 15 minutes After sampling, turn off the fan and power supply, and move the sampling car to the original place Use of clean sampling vehicle 1 Please use the clean sampling vehicle in the environment with room temperature no more than 50 ℃ 2 In order to keep the clean air flow pattern undisturbed, it is necessary to avoid disturbing the air flow pattern as much as possible 3 For the first use of the clean sampling vehicle, the clean sampling vehicle and the surrounding environment must be cleaned first The ultra clean vacuum cleaner or the tool without fiber production shall be used, and then the sterilization treatment shall be carried out by the drug sterilization method or the ultraviolet sterilization method 4 Measure the average wind speed of the working area with an anemometer regularly If it is found that it does not meet the technical indicators, adjust the handle of the voltage regulator, change the input voltage of the fan, and make the clean sampling car in working condition The clean sampling vehicle is a kind of local air purification equipment with vertical unidirectional flow The product is an ideal purification mobile device for sampling and goods delivery in the fields of medicine, health, biological products, food, electronics, etc The product is suitable for dust-free environment and is commonly used for sampling raw materials of pharmaceutical preparations (excluding sterile preparations) Operating procedures and precautions for clean sampling vehicle when using the clean sampling vehicle, turn on the ultraviolet sterilization lamp 50 days in advance to deal with the microorganism accumulated on the surface of the clean sampling vehicle in the purification work area; turn off the sterilization lamp 30 days later and start the blower For the newly installed or long-term unused clean sampling vehicle, the clean sampling vehicle and the surrounding environment must be cleaned carefully by using ultra clean vacuum cleaner or non fiber tools before work, and then sterilized by drug sterilization or ultraviolet sterilization It is forbidden to store unnecessary articles in the purification work area to keep the clean air flow pattern undisturbed Try to avoid disturbing the air flow pattern in the purification area Measure the average wind speed of the working area with an anemometer regularly (usually once a month) If it is found that it does not meet the technical indicators, adjust the handle of the voltage regulator and change the input voltage of the fan to make the clean sampling vehicle in a better working condition The service temperature of the clean sampling vehicle shall not be greater than 50 ℃.