Vertical large and medium-sized blower drying chamber use method

1.
Put the items that need to be dried into the drying box, close the door of the box, and rotate the damper adjustment knob to the "" place
.

2.
Dial the power switch to "1", at this time the power indicator is on, and there is a digital display
on the temperature controller.

3.
The operation method of the intelligent temperature controller is operated
with reference to the "6" below.

4, according to the different degrees of humidity of different items, choose different drying box time, such as the dried items are relatively wet, you can rotate the damper adjustment knob to the "three" place, so that the wet air in the box is discharged
.

5.
After the drying is over, if the item is not taken out immediately, the damper adjustment knob should be rotated to close the damper, otherwise the damper will still be opened, and then the power switch will be dialed to the "off" place, such as immediately open the door to take out the item, be careful of burns
.