Walk-in high and low temperature test chambers need to pay attention to

Walk-in high and low temperature test box is generally relatively large, in the use of the need to be careful, the following by me to bring technical personnel to explain to you the use of walk-in high and low temperature test box need to pay attention to: 1, walk-in high and low temperature test box door lock can only be opened from the outside, if there is a need to enter the box must be monitored, otherwise it is strictly forbidden to enter; 2.
If the walk-in high and low temperature test chamber is not used for a long time, it is necessary to do moisture removal treatment regularly to avoid damaging the relevant devices; 3.
If the test chamber is put into the heating test items, do not directly use the power supply of the equipment itself, and the items need to use an additional power supply; 4.
When the temperature in the walk-in high and low temperature test chamber is ≥ 55, do not immediately open the refrigeration compressor, so as to ensure the safety of the compressor; 5.
Please do not open the door or enter the box unless necessary during the test.
to avoid personal injury and equipment malfunction; 6.
Do not gravity open/close the test box door, otherwise it will lead to the failure of the door and unnecessary problems during the test, and injury; 7.
It is strictly forbidden to place prohibited items in the working area of the walk-in high and low temperature test box, and the above are some places that need attention, please browse
carefully.