-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Water-wrapped water, water-wrapped sand imitation stone coating more and more commonly used in the building's exterior wall decoration, construction is generally encountered in vertical construction, when encountering some other surface construction (such as: Roman columns, cylindrical, etc.), these should be how to build?
1, cylindrical
spray method: cylindrical spraying to choose a small nozzle tool, with a jitter gun method, so that it is as far as possible sprayed with water, water bag sand paint, and then brush with a brush flat water, water bag sand. If you meet the place not sprayed can also be slightly coated with a brush, and then sprayed with a spray gun, pay attention to the construction thickness should not be too thin or too thick.
2, three-dimensional Roman column
spray method: when encountering such a construction surface needs to use "M" linear spray method, from the grass about 40 centmes, spray gun vertical column spray, top-down
. When one side of the spray can be sprayed on the other side, the spray steering angle of 60 degrees is appropriate.
3, square column
spray method: because the square apostle angle is clear, the construction slightly uneven spraying will lead to angular blur, so spraying needs to be maintained at a distance of 50 centenn minutes for construction, so as to ensure the overall appearance of the original building aesthetic.
4, flat construction
spray method: First of all, the section line groove part of the spray is completed, pay attention to the spraying of the groove inside the spray even, in order to simulate high degree, the right angle part must be sprayed vertically.
groove part of the spray finished, can be sprayed wall facade, spraying pay attention to the uniform speed full spray, keep the gun distance, pay attention to gun pressure, because the effect of spraying more thick, spray less will appear dew bottom. After the first water bag sand is dried out, in order to present a more realistic imitation stone effect, you can make a second reseeding.