What are the adjustment methods of filling and capping machine

The filling and capping machine is specially designed for the new oral liquid bottle The design is reasonable, the structure is simple, the operation is convenient, and the mechanical bottle shortage stop filling device is provided So, what are the adjustment methods of filling and capping machine? Today's editor will introduce to you: 1 Adjustment of the feeding half A adjust the bottle blocking plate a on the feeding half upward to shorten the adaptive bottle feeding stroke; adjust it downward to extend the adaptive bottle feeding stroke B adjust the positioning bottle position left and right to align the bottle position when the movable teeth are running so that the bottle can be smoothly fed into the positioning teeth C adjust the bottle blocking plate B so that the width of the bottle inlet is about 22 mm 2 The function of the filling component is to timely deliver the liquid medicine to each easy to pull bottle through the filling device, one-way valve and needle Therefore, when the needle enters the bottle mouth, it must be appropriate and the filling time must be appropriate A adjust the side cam a to rotate or reverse so that the needle is inserted into the mouth of the empty bottle as soon as it enters the tooth shape position And lift the needle before leaving the tooth position B adjustment of filling time: start filling immediately after the adjustable needle of cam B is put into the bottle mouth, and stop filling before the needle leaves the bottle mouth C adjustment of liquid volume: loosen the nut 1 to adjust the ejector rod in the D direction and increase the liquid volume; adjust the liquid volume in the c direction to reduce, and adjust the nut 2 to adjust the liquid volume in the f direction to reduce, and adjust the liquid volume in the e direction to increase When adjusting, pay attention to the limit position of the injector, so as to avoid damage to the injector Generally, it is better to spray at least 15mm from the bottom of the injector, and the longer the pouring time is, the better 。 3 Working principle and adjustment of automatic stop filling device
When the tooth plate is moved to move the bottle to the gear position of filling liquid, the convex surface of cam 7 is away from swing plate 6, swing plate 6 is pulled by tension spring 4 and swings clockwise Swing plate 6 drives bottle pressing bolt 2 to move downward until it contacts bottle 3 At this time, adjust the contact of swing plate 6 of steel wire rolling head 5 and adjust the adjusting screw 8 to make the ejector pin 1 extend about 4mm There is an empty bottle in this position , the bottle pressing bolt 2 and the shaking plate 6 continue to move down due to the action of the tension spring 4, until the steel wire rolling head 5 pulls the steel wire to make the top rod bolt 1 separate from the top rod 9, so they can not drive the medicine filling device to work, and the medicine filling will be stopped automatically 4 Precautions for discharging: since this machine is an easy to pull bottle filling and locking device, the discharging has been sealed In order to prevent the bottle after filling and locking from overturning, it is necessary to put a number of empty bottles on the discharging hopper in advance before discharging the first bottle to keep the bottle after filling and locking smoothly transported to the discharging hopper, and send it to the next process with a bottle holding hopper 5 The mouth locking device is designed for the existing specification of easy-to-pull bottle according to the domestic oral liquid production situation Therefore, there are certain requirements for the geometric dimension and error of easy-to-pull bottle If there are special requirements or other specifications, please contact our technical department 6 Adjustment of the locking device A adjustment of the gland time: adjust the rotation angle of the cam 3 When the filling liquid bottle enters the tooth position of the locking mouth, the locking shaft has moved and leaves the bottle cap before moving the tooth close to the bottle B adjustment of gland pressure: the size of gland pressure is directly related to the quality of the lock mouth If the pressure is too large to make the bottle broken, the sealing performance will be affected if the pressure is too small Therefore, the nut 6 should be adjusted according to the actual average height of the bottle to make the pressure better C adjustment of blade action time: blade 2 should be close to the bottleneck before the end of gland, otherwise some short bottles can not reach the locking effect Loosen nut 4 during adjustment, and adjust shaft 5 and up and down to make blade 2 action time sooner or later Note that the spring force of adjusting spring 7 should be greater than that of spring 8 to keep the bottleneck consistent D when adjusting the lock mouth, attention shall be paid to the locking of nuts after the adjustment of each department During the initial valve test, the easy pull bottle shall be used, and its average height shall be taken The irregular easy pull bottle shall not enter the lock mouth, so as to avoid damaging the parts 7 Adjustment of vibrator: the automatic cap dropping adopts the electromagnetic oscillation principle to drop the cap to a proper position along the track according to a certain motion track A the vibrator is packed separately when it is delivered from the factory When it is installed, the lower rail port must be aligned with the easy to pull bottle moving rail A B adjustment of magnet gap: loosen the screw 1, open the cover, adjust the nut 2 to make the magnet gap 0.6-0.8, and make the vibration sound low and the cap line speed fast.