echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > What are the better treatment methods for natural gold sand wear-resistant flooring?

    What are the better treatment methods for natural gold sand wear-resistant flooring?

    • Last Update: 2021-01-02
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    China Paint Online News Information
    Natural gold sand due to its strong hardness, wear resistance and other excellent chemical properties, added to the floor construction raw materials can make the floor with high density, easy to clean, anti-penetration advantages, so in recent years in factories, workshops, parking lots, airports, schools, hospitals and other places widely used.
    Fivans was the first to apply the unique local mineral resources in the industrial floor, with the special process of Fivans processing and based on many years of experience to continuously improve the ideal high-quality flooring raw materials, and applied for a national patent, (according to China's Encyclopaedic records) Hubei Daye iron ore smelting alloy hardness is high, large iron ore mining since 226 A.D., Fivans products alloy bone is the use of large iron ore smelting. Quartz quartz in Luchun County, Hubei Province, contains more than 99.98 percent silicon, the highest taste and hardness in the country; Widely used in Fivans coatings and wear-resistant flooring. The quality of silica ash is the second highest in the world. Cement: Zhang Zhidong, then governor of Huguang, in 1894 (guangxu twenty years), had sent samples from The Yellow Jingshan to Germany, entrusting the minister through the German chemist "stacked test detail", came to the conclusion that "the ore of Daye Huangjingshan is the best raw material for the production of cement limestone".
    (see all pictures on China Paint Online News)
    how can construction increase the wear resistance of the ground?
    1. Pad treatment: pad treatment is to carry out site flat treatment, in the construction process to copy flat, line, do a good job of height control, site flat processing after the end of the drawing planning request for rebar tie.
    2. The grass-roots concrete pouring concrete before pouring to make the foundation in a wet condition, concrete as far as possible once poured to the standard height, part of the non-standard high with concrete material to fill and stir, strictly prohibited the use of mortar repair. When using a flat-type oscillator to stir, columns, edges, corners and other parts with wood smear pulp, concrete scraped flat after the cement slurry surfaced at least 3mm thick. After the construction of concrete, if the duration request is tight, you can use rubber pipe or vacuum equipment to remove the water, repeat more than two times after the beginning of the construction of the gold sand surface layer; During the concrete construction process, the gold and gold materials are mixed together.
    3. The opportunity for the first time to sprinkle the cast of the diamond sand mix and the smoothing and polishing of the gold sand mix varies with the climate, temperature, concrete cooperation ratio and other factors. Sprinkling too early will cause the sand to sink into the concrete and lose its function, the cast too late concrete has solidified, will lose the bonding force, so that the gold sand mix can not bond with the concrete and form a peeling. The way to distinguish the time of casting of gold sand mixing material is to step on it, about 5mm sinking, you can start the first cast construction. Walls, doors, columns and templates and other edges of moisture is not fast, it is advisable to give priority to the construction, in order to prevent water loss and reduce the role. The first spread is the amount of 2/3 of the amount, mixing should fall evenly, can not be thrown hard to part, after spreading with a wooden smear flat. After the mix absorbs the expected moisture, the turntable grinding dispersion is removed with a polisher and is associated with the base concrete slurry.
    4. When the 2nd caster mixes and smooths and polishes the 2nd sprinkle, first measure the level with a ruler or straight scraper, and adjust the top spot of the table, the 2nd direction should be straight for the first time. The 2nd scattered amount is 1/3 of the amount of the total amount, immediately after the spread flattened, polished, and repeated polishing machine work at least twice, polishing machine work should be cross-sectional interweaving, uniform and orderly, to prevent the collection of information. The corners are treated with a spat. When the surface data hardens to the finger pressure subsides slightly, the speed and view point of the polishing machine should be adjusted according to the hardening situation, and the polishing machine should be interwoven more than three times when working. The flatness request on the wear-resistant ground is 3 to 5 mm for the maximum deviation of 2m square, and the maximum deviation between the highest height and the maximum deviation of the extreme low is not greater than 20mm, so as to prevent cracking, peeling and sanding appearance as far as possible.
    5. The selection of quality clearance of wear-resistant flooring materials, such as the hardness of 7.5-8 RZG natural gold sand wear-resistant flooring materials, will be more resistant to wear and pressure.
    6. Avoid cutting the amount of work, gold sand floor wear resistance is not enough, in many cases because the amount of gold sand material per square meter is insufficient, so pay attention to the construction of the operation to be standardized.
    it is understood that KETCH is headquartered in California, USA is committed to research, development and production of high-performance flooring and the provision of engineering services. The Three Gorges Dam, the world's largest single building, uses the Fifans floor. In the history of many years, Fivans has been playing the role of leader and innovator, in 2008 was responsible for the preparation of the flooring national standard "floor coating materials" GB/T22374-2008, the company is currently moving to a blank city, interested in the company can understand.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.