What are the fault alarm systems of the walk-in constant temperature and humidity test room?

The walk-in constant temperature and humidity laboratory is a large-scale assembled constant high and low temperature humidity and heat test equipment.
Due to special environmental requirements, the staff have to clearly grasp the conditions of the constant temperature and humidity laboratory
.

When the walk-in constant temperature and humidity test room fails, it will alarm.
Do you know what the fault alarm system of the walk-in constant temperature and humidity test room has? Introduced by Aipeilai: 1.
Water shortage alarm: The laboratory is equipped with an automatic water replenishment system, and an alarm will appear when there is water shortage in the water tank or water overflows outside the tank
.

2.
Overheating and overcurrent alarm: When the fan in the walk-in constant temperature and humidity test room is overheated or overcurrent, an alarm will sound
.

When the fan coil is overheated, the equipment will stop and alarm, and the test must be resolved before continuing the test
.

When the fan current exceeds the allowable value, the walk-in constant temperature and humidity test room will stop and alarm, and the equipment must be restored to normal operation after the overcurrent fault maintenance is completed
.

3.
Over-temperature alarm: When the temperature in the device is too high, the induction system will alarm
.

The staff should immediately cool down the box.
When the above situation occurs, the door of the box should not be opened immediately to avoid burns
.

4.
Overheating of refrigeration and heating compressors will also alarm: When the operator of the walk-in constant temperature and humidity chamber does not operate properly, the alarm system of the test box will also remind
.

And it will prompt the operation steps to contact the alarm
.

In order to ensure the safety of operators and test products, the walk-in constant temperature and humidity test room alarm system is indispensable
.