What are the four main maintenance requirements for lifting and reversing pelletizer

The lifting and reversing granulator is to put the wet particles made in the previous process into the rotating centrifugal disk, so that the wet particles are subjected to the air buoyancy of the annular space, the rotating centrifugal force and self gravity, and move in the form of circular rope strands The formula liquid is injected into the moving material layer through the multi fluid spray gun in a reasonable direction, so as to form a ball with high sphericity The principle is similar to that of the rotating fluidized bed The pellet system of the lifting and reversing pelletizer is to mix the powder material and the adhesive to make a suitable soft material, then extrude the soft material into the cylindrical particles, and then put them into the spherical shot blasting mechanism to form the spherical particles with high sphericity, dry the excess water with the drying equipment to obtain the required spherical particles Features of lifting and reversing pelletizer: 1 Lifting and reversing pelletizer is applicable to the crushing and finishing of particles in Chinese and Western medicine, food, chemical pigment and feed industries The shape and specification of particles obtained by various granulation processes and equipment are different After the granulated particles are combined and cut by the high-speed rotating blade of the machine and discharged by the mesh plate, the particles with basically the same shape and specification can be obtained 2 All parts of the lifting and reversing pelletizer are made of stainless steel, with polished surface, easy to install, disassemble and clean The maintenance requirements of the lifting and reversing granulator mainly include the following four points: 1 Cleaning: clean the inside and outside of the equipment, make sure that there is no oil stain on each sliding surface, lead screw, rack, gearbox, oil hole, etc., and that there is no oil leakage or air leakage at each part, and the mechanical engineer of chips, sundries and dirt around the equipment shall clean up; 2 Tidiness: tools, accessories and workpieces shall be placed in order, and pipes and lines shall be organized; 3 Good lubrication: oil filling or changing on time, continuous oil without dry friction, normal oil pressure, bright oil mark and smooth oil path 4 Safety: abide by the safety operation regulations, use the equipment without overload, lift and reverse the whole granulator with complete and reliable safety protection devices, and eliminate the unsafe factors in time.