-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
In order to make the powder vacuum packaging machine can work better for us, extend the service life of the equipment, customers in the purchase of powder vacuum packaging machine, must be regularly effective maintenance and maintenance.
what are the maintenance techniques for powder vacuum packers? 1, powder vacuum packaging machine should be at a temperature of -10 degrees C - 60 degrees C, relative humidity is not greater than 85%;
2, the vacuum pump oil level should be checked regularly, regularly added to keep the oil level in the oil window 1/2 to 3/4 position;
3, when the oil in the pump is observed to be black or white, there are water drops in the oil, or the viscosity increases, it is proved that the oil has been contaminated, the oil should be replaced immediately.
oil is normally changed every 1-2 months of continuous operation.
4, with dewatering device models should be in accordance with the water situation of the packaging, regular drainage from the rear of the equipment drainage pipe, drainage and then put on the pipe plug, the general water will automatically decompose, no discharge.
: Automatic vacuum packaging machine in addition to doing the above preparation also need: according to the equipment studio automatic operation speed and operating workers working speed, adjust the speed adjustment time relay on the equipment panel length longer or shorter.
This device is equipped with an emergency stop switch, if there are special circumstances to press this switch, the upper cover automatically open is directly above, pending the exclusion of the situation, open the emergency stop switch, push the upper cover to the working side, the device into a normal working state.