-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Shanghai Shenggang automatic spray filling machine is a special equipment for spray filling developed by our company on the basis of absorbing foreign technology
.
It is suitable for filling round and special-shaped bottles of various materials and nozzles of various specifications
.
It adopts peristaltic pump filling, disc positioning type upper nozzle, screw cap, high degree of automation, which solves the inconvenience of manual nozzle installation, human-machine interface control, and has the advantages of accurate filling measurement and simple operation
.
Widely used in medicine, daily chemical and other industries
.
Fully compliant with GMP requirements! 1.
The specific operation process of the spray filling machine is as follows: 1.
Inspection before use: After the machine is installed, turn on the power to ensure the correct running direction, ensure the pressure and flow of the compressed air, and check whether the motors and bearings need to be lubricated.
It is strictly forbidden to run without oil.
The machine can be started only after normal operation.
At the same time, observe whether the fasteners of each part are loose.
After the operation of each part is stable, it can be used normally
.
2.
Check whether the safety facilities are functioning properly
.
3.
Before starting the machine, carefully check whether there is water in all the water tanks, whether the chain plates are stuck, whether there are sundries on the conveyor belt, whether there are bottle caps in the storage cover box, whether the water source, power supply, and gas source are connected, and prepare for various conditions.
After that, turn on the main power again, the power indicator is on, the fault indicator and emergency stop indicator are not on, then the starting conditions are met, press the start button on the control box and the start switch at the filling place, and the buzzer will sound three warnings.
After the machine is finished, the whole machine starts to run.
When the machine stops, press the stop button at the filling place and the control box.
After stopping, the main power supply should be turned off
.
