What are the operation and maintenance methods of the automatic nucleic acid detection reagent filling machine

The fully automatic nucleic acid detection reagent filling machine is designed on the basis of the filling machine series, and some additional functions are added
.

It makes the product more simple and convenient in operation, accuracy error, installation adjustment, equipment cleaning, maintenance and so on
.

The automatic nucleic acid detection reagent filling machine is widely used in various industries such as daily chemical and oil, and can fill different high-viscosity fluids
.

The design of the machine is compact and reasonable, the appearance is simple and beautiful, and the filling volume adjustment is convenient
.

The automatic nucleic acid detection reagent filling machine is mainly suitable for detection reagents, nursing liquids, oral liquids, skin care liquids, disinfectants, hand sanitizers, eye washes, nutrient solutions, injections, pesticides, medicines, perfumes, edible oils, lubricants and Liquid filling for special industries
.

The automatic nucleic acid detection reagent filling machine is normal pressure filling, the filling valve is fully enclosed, and the automatic type is the empty bottle passed from the bottle conveying line.
The empty bottle is then sent to the turntable, and the empty bottle is rotated immediately.
At the same time, the empty bottle is held up by the soft support mechanism.
After the bottle mouth contacts with the filling valve, it is automatically opened for filling.
After filling, the bottle is automatically pulled out and enters the bottle conveying line.
Process ends
.

The machine is equipped with an automatic protection device.
If the bottle is stuck, the machine will automatically stop to protect the safety of the human and machine
.

 　　Operation and maintenance of automatic nucleic acid detection reagent filling machine: 1.
Put the filled liquid bottle upside down on the work basket, and check that the lower mouth of the liquid bottle should be aligned
.

 　　2.
Put the vacuum basket in the vacuum tank, close the quick-open lid and lock it tightly
.

 　　3.
Close the vent valve, the liquid inlet valve, open the vacuum pump, adjust the vacuum connection valve to make the vacuum degree (depending on the test filling amount) meet the process requirements, and step on the foot pedal to insert liquid into the lower port of the liquid bottle to be filled
.

 　　4.
Slowly open the liquid inlet valve.
At this time, the liquid level in the filling increases, and at the same time, the vent valve is opened to keep the liquid level between the liquid levels specified by the sight glass
.

 　　5.
When the pointer of the vacuum gauge is in the 0 state, it proves that the filling is completed, and the foot collapse plate is returned, and the quick-opening tank cover can be opened to take out the filled liquid bottle
.

 　　6.
For the troubleshooting of vacuum mercury, see (XD series but grade rotary vane vacuum pump instruction manual).
If the vacuum pump is not used for a long time (more than seven days), the oil used in the mercury should be drained and rinsed with new oil.
Prevent the water in the oil from corroding the pump body
.