What are the precautions in the operation of the hose filling and sealing machine?

Hose filling and sealing machine is suitable for medicine, food, cosmetics, daily chemical industry and other industries This sealing effect can be said to let people get a comfortable use experience of Zui Our Zui toothpaste is a good example, which makes us feel convenient and fast The equipment adopts touch screen and PLC control, automatic pipe loading, automatic positioning and hot air heating system formed by imported fast heater and high stability flowmeter, which has firm sealing, fast speed, no damage to the sealing part appearance, beautiful and neat Sealing Tail appearance Various filling heads of different specifications can be selected to meet the filling requirements of different viscosity, and equipped with plexiglass dust cover The transmission part is closed below the platform, safe and reliable, and pollution-free; the filling and sealing part is installed in the semi closed electrostatic free frame visible cover above the platform, easy to observe, operate and maintain So what are the precautions when operating the equipment, do you know? The following small edition will share with you the experience gained from using the equipment for many years Let's have a look at it together: 1 After the arrival of goods, the operators should carefully read this manual The filling and sealing machine can only be operated by professional personnel who are trained and qualified by the manufacturer Non professional personnel are not allowed to operate the machine 2 All kinds of protection shall not be removed or prohibited at will to avoid damage to the machine and personnel 3 Do not change the factory setting parameters when it is not necessary, so as to avoid unstable operation or misoperation of the machine When the parameters have to be changed, please record the original parameters so as to restore the settings 4 Please close all doors and windows during operation to avoid personal injury caused by accidental contact 5 During commissioning, the protection of observation window and door can be prohibited, but it shall be operated by professionals familiar with the motion state of the machine 6 Do not shut down the machine, cut off the power supply, air source and water source when disassembling the parts; handle and handle the parts gently to avoid damaging the parts 7 After disassembling and assembling the machine parts, inching test shall be carried out, and the machine can be started only after inching test is confirmed to be correct, so as to prevent the accident of machine injury 8 Before heating the hose, it is necessary to start the main engine and cooling water according to the prompts of several devices, otherwise the hot air blown by the heater may melt the pipe cup on the working plate and the cooling water pipe connected to the heater, causing damage; after heating is turned off, the air supply fan will delay working until the actual temperature of the heater drops below 60 ℃, the air supply fan will stop working, and the cooling water will continue to work until the heater is fully cold However, only when the temperature reaches 30 ℃, can the power supply and cooling water of the main engine be turned off, so as to avoid damage to the parts caused by waste heat 9 Touch the touch screen gently by hand Do not use excessive force or hard objects instead of fingers to touch it to avoid damaging the touch screen 10 Plexiglass observation window and plexiglass parts shall not be wiped with organic solvent or hard substance to avoid damage to transparency 11 The lens of inspection mark and inspection tube sensor shall be wiped with clean soft cloth to avoid damage 12 Remember the operator password provided by the manufacturer Through the sharing of the above small edition, what precautions do you have for the operation of the hose filling and sealing machine? Have you learned all about it? I also hope that this paper can be helpful to the fight