-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
China Paint Online News Information on the construction of anti-corrosion acid ceramic pipe project epoxy resin glue plug-in interface construction regulations, recently China Paint Onlineexperts, specifically introduced: the socket should be filled in first Resin mortar with a thickness of 10 to 15 mm, and then filled with asbestos rope soaked in resin substrate, its depth is 12 deep in the ring seam, the joint of the asbestos rope should be placed on the upper part of the ring seam.
at the same time when watering resin glue, the bezel at the outer end of the port should be tightly stuck, the upper end should be left watering and exhaust port, the resin glue slowly into. The glue should be filled with fullness. When the construction environment temperature is below 10 degrees C, heating insulation measures should be taken. According to China Paint Online
experts, in addition, when the resin glue completely cured to remove the bezel, the outer end of the interface should also be timely coated with resin mortar.
。