What is the general design scope of a cryogenic evaporator?

The main function of the low temperature heat pump evaporator is to reduce the boiling point under the action of vacuum negative pressure, so that the original liquid is heated at 37 ° C degree boiling and evaporating, the evaporated steam is condensed into liquid water through the condensation system through the drainage tank discharge, according to the different proportions of water quality concentration and reduction of water can reach 80% ~ 95%.

Through the low temperature evaporator equipment to concentrate and reduce the amount of waste liquid, can greatly reduce the cost of enterprise waste liquid treatment, and the equipment occupies a small area, convenient movement, high degree of automation, no need to connect the external steam source and peripheral cooling water, only need to provide electrical energy and a small amount of compressed air
.

What is the general design range of a cryogenic evaporator? The following four points are explained to you: 1) The power wiring of the sewage project, the owner will lead the main power supply to the distribution control box of the treatment equipment, and the distribution distribution box to the use point of each electrical appliance will be responsible for
the enterprise itself.

2) From the waste liquid collection tank to the discharge port of the treatment equipment
.

3) Sewage engineering process flow, process equipment selection, process equipment structure layout, electrical control instructions and other design work
.

4) Pipeline process structure of sewage treatment project, construction, installation, commissioning and other work
of equipment.