echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > What should be paid attention to in the sand and gravel separator of the mixing station?

    What should be paid attention to in the sand and gravel separator of the mixing station?

    • Last Update: 2022-08-20
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    What should be paid attention to in the sand and gravel separator of the mixing station? 1.
    At present, the transport vehicles of many mixing stations are social vehicles, and the mobility of personnel is relatively large, which makes the management of our mixing stations more difficult.
    The discharging is not operated according to the regulations, which causes the material blockage, which leads to the incomplete discharge of the punching chute.
    work
    .

     2.
    If there is residual material in the mixer truck, if the driver still follows the originally set procedure, it is easy to cause material blockage or even damage to the separator equipment, because the originally set procedure is for normal transportation.
    To operate, if the cleaning time is shortened, such as cleaning for only 10 minutes, it is obviously unable to meet the requirements for cleaning and separation of residual materials.
    Therefore, special personnel must be required to operate, change the automatic to manual, and carry out standardized operations.
    The material is completely separated, and after the separation is completed, it is transferred to the automatic program.
    Only in this way can the correct operation ensure the normal operation of the separator without beating the material.
    The damage of the separator in most of the mixing plants is caused by this
    .

     3.
    Regular cleaning and discharging of the waste discharge port of the sand and gravel separator.
    In use, the sewage outlet should be cleaned every other month to prevent the sludge from caking and blocking the sewage outlet.
    Especially in winter, the sewage outlet should be cleaned regularly
    .

     In addition, there are several points to pay attention to: (1) Before starting the test run, you must pay attention to whether there is any foreign matter in the auger and the stone splitter, and if so, it should be cleaned and eliminated in time
    .

     (2) When the separator is completed after each shift, the operator should clean the main equipment once
    .

     (3) When the main equipment of the sand and gravel machine stops working in each shift, it is necessary to check whether the trommel screen of the gravel machine in the machine is clean in time, and it is required that no debris is blocked
    .

     (4) When the sand and gravel machine equipment stops working in each shift, the cage pieces in the machine should be checked in time.
    If there is dead pulp or hard blocks on the pieces, they should be disposed of in time to ensure that there is no debris blocking
    .

     (5) When running the host equipment in winter, the heating equipment should be checked in time to avoid freezing of the equipment, so as not to affect the normal operation and separation effect of the host equipment
    .

     (6) When the main equipment of the sand and gravel machine stops working in each shift, the accumulated material in the separator must be washed to prevent the next start difficulty due to concrete curing, and even damage to the motor and the main shaft of the sand separator
    .

     (7) When separating a large amount of concrete, the cutting should be carried out gradually and not excessive, so as not to affect the separation effect
    .

        ‍
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.