What should be paid attention to when selecting the automatic temperature control system of reactor?

The automatic temperature control system of reactor is used for temperature control of supporting reactor and reaction tank in pharmaceutical and chemical industry, so what aspects should users pay attention to when selecting the automatic temperature control system of reactor? The automatic temperature control system of reaction kettle is often used to control the temperature of reaction kettle and reaction tank The matching reaction kettle is usually composed of reaction vessel, agitator, etc it is heated by heat-transfer oil with high heating speed The ordinary reaction kettle is made of stainless steel body and cover The body of the kettle is connected by thread and flange, and the cover of the kettle is a normal flat cover, and the two main screws are distributed in all directions The bolts and nuts are fastened and connected The main sealing of autoclave adopts A-type double line sealing, and other sealing points adopt the sealing mode of line contact between arc surface and plane, arc surface and arc surface Relying on the high precision and brightness of contact surface, good sealing effect is achieved Attention shall be paid to the selection of automatic temperature control system of reaction kettle When selecting and matching oil pump, the model shall be selected according to the flow meter If the oil pump is small, it will lead to uneven temperature guarantee of oil temperature machine, which increases the unnecessary cost Wuxi Guanya always adheres to strict working attitude in the selection of customers, and ensures that the preparation of each technical plan is handed over to customers If it's because of the price, you can sell more expensive if the same equipment is used in the same process: in fact, this is easy to understand There are many types and models of mobile phones, many functions can be completed, but the price gap is quite large Therefore, the price of reaction temperature control system is the same Of course, it is the same product, mainly due to different temperature control demands and different costs, so there is a gap in price So it's also your product, how the price is not the same: why do you consume it, but the price of the two models is not the same The reason why the prices are different is that although all of them are temperature control equipment, some of them are hot and cold, some of them are refrigeration and heating, and some of them are temperature control up and down and process demand So reaction temperature control system may be a little more expensive The temperature control equipment of the reactor produced by Wuxi Guanya adopts a fully closed temperature cycle system, which completes multi-stage temperature control and is often used in the chemical and pharmaceutical industry Provide free device and operation guidance If there is any after-sales problem, we will rush to the site to deal with it for you When selecting the reactor automatic temperature control system, due to the difference of configuration, process and model, the price is different When users choose the reactor automatic temperature control system, they can't judge which one is better by price, but they need to choose the high cost-effective reactor automatic temperature control system according to their own needs.