echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Active Ingredient News > Drugs Articles > What should be paid attention to when using low temperature coolant circulation pump?

    What should be paid attention to when using low temperature coolant circulation pump?

    • Last Update: 2022-05-03
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    What should be paid attention to when using low temperature coolant circulation pump? The low-temperature cooling liquid circulating pump is a low-temperature liquid circulating equipment that adopts mechanical refrigeration, and has the function of providing low-temperature liquid and low-temperature water bath
    .

    So, what should be paid attention to when using the low temperature coolant circulation pump? The following editors have sorted out the relevant matters for you, hoping to help you
    .

    1.
    Before using the low temperature coolant circulation pump, the liquid medium should be added to the tank (a 1:1 solution of pure water, ethanol, ethylene glycol and water is also acceptable)
    .

    The medium level cannot pass through the cooling coil in the tank and should be below the specified 20mm
    .

    2.
    Power supply: 380V, 220V, 50Hz, the power supply should be greater than the total power of the instrument, and the power supply has a good "grounding" device
    .

    3.
    Avoid acid and alkali substances entering the tank to corrode the coil and the inner tank
    .

    4.
    The instrument should be placed in a dry and ventilated place, and there are no obstacles within 300mm around the instrument
    .

    5.
    Since alcohol is a volatile medium, always pay attention to observe the liquid level in the tank
    .

    When the liquid level is too low, liquid medium should be added in time
    .

       6.
    When the working temperature of the low-temperature thermostat or the low-temperature coolant circulation pump is low, please be careful not to open the upper cover, and do not let your hands enter the tank to avoid frostbite
    .

       7.
    After use, turn off all switches and cut off the power
    .

       8.
    When the liquid flows out, the user should pay special attention to the firmness of the outlet pipe joint and prevent liquid leakage
    .

     9.
    The instrument should be cleaned regularly
    .

    If it is not used for a long time, please empty the medium in the tank and wipe it clean to keep the workbench and operation panel tidy
    .

    The above is the relevant content about the precautions for using low-temperature coolant circulating pump.
    I believe that after reading it, you will have a corresponding understanding of this and understand the relevant matters in order to avoid accidents and keep their products in good working condition.
    Everyone helps
    .

     
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.