What should I pay attention to when building and operating a walk-in high and low temperature alternating humid heat laboratory?

At this stage, as all walks of life have higher and higher requirements for product quality, many enterprises are all building their own walk-in high and low temperature alternating humid heat laboratory to supply and demand contradiction goods testing and product research and development, and this also promotes the vigorous development of walk-in high and low temperature alternating humid heat laboratory company, 1 walk-in high and low temperature alternating humid heat laboratory in the construction and operation of what to pay attention to? First, the construction takes into account the relevant norms and social practice activities require the construction of walk-in high and low temperature alternating humid heat laboratory, then, the key is to carry out the overall planning and construction according to ISO, GB standards, which is the basic specification, but also according to the consumer's social practice activities, the laboratory must be set up, and the wind speed in the experimental room should be controlled at 0.
25 m / s
.
Around the laboratory, there can be no relatively strong magnetic field, there must be a stable geographical environment, there must be no surprise, and there can be no pyrogens, and it is necessary to ensure that the clean environment near the laboratory is clean, there is no peculiar smell, and air pollution is not allowed
.
The height of the building in the experimental room should be 3 meters long
.
Second, the requirements for formulating specifications during application because any enterprise related to the walk-in high and low temperature alternating humid heat laboratory is an important working environment, so some insignificant work in the staff can not enter, which is important from the relevant safety factor full consideration, to avoid some dust ingress, resulting in damage and air pollution
.
And it does not matter the income and expenditure of the staff, but also damage the internal temperature geography, leading to the failure of the experiment
.
Third, do a good job of professional maintenance walk-in high and low temperature alternating humid heat laboratory After the construction of the laboratory, it is necessary to hand over to professional staff to restart maintenance and maintenance regularly, which can ensure the operation of
machinery and equipment.