-
What is the difference between the load of the standard machine of the constant temperature and humidity test chamber and the energized load
Time of Update: 2022-10-21
What is the difference between the induced start-up and load of the constant temperature and humidity test chamber system? Induction start-up refers to people's test products put in the shell to do in
-
How to maintain can make the constant temperature and humidity test chamber operate reliably for a long time
Time of Update: 2022-10-20
The constant temperature and humidity test chamber needs to be cleaned and maintained during use, which can ensure the normal operation of the constant temperature and humidity test chamber.
-
What is the purpose of the constant temperature and humidity test chamber test?
Time of Update: 2022-10-20
The so-called environmental test equipment is: simulate a variety of natural environmental conditions (such as: temperature, humidity, vibration, rain, dust, air volume, etc.
Temperature and humidity signals can be stored and recordedThe so-called environmental test equipment is: simulate a variety of natural environmental conditions (such as: temperature, humidity, vibration, rain, dust, air volume, etc.
-
Heating and cooling rate of constant temperature and humidity test chamber
Time of Update: 2022-10-19
The heating and cooling rate measurement of the constant temperature and humidity chamber needs to be carried out under full load conditions, and the heating and cooling rate: the average change rate per 5min is 5±1 °C/min or the average change rate of the test chamber is high.
-
The expression can program the definition and measurement method of environmental humidity of the constant temperature and humidity test chamber
Time of Update: 2022-10-19
Common environmental humidity measurement methods are: dynamic method (double pressure method, double temperature method, separation method), static data method (saturated state salt method, hydrochloric acid method), leak point method, wet zone ball method and electronic controller method).
-
Constant temperature and humidity test chamber working procedures and regulations
Time of Update: 2022-10-19
Constant temperature and humidity test chamber adopts wet area spherical intelligent two-stage program temperature and humidity controller, ambiguous PID control panel, temperature control humidity co
-
Protection principle of constant temperature and humidity test chamber
Time of Update: 2022-10-19
To solve the protection problem of constant temperature and humidity test chamber, it is not only necessary to achieve good protection performance, but also to achieve the principle of economic reasonableness.
-
How to remove dust in the cabinet of the constant temperature and humidity test chamber
Time of Update: 2022-10-13
Constant temperature and humidity test chamber environmental test chamber due to long-term application, some of the cat plague dust stored in the gas will enter the cabinet, with the time of lifting d
-
Overhaul experience in constant temperature and humidity test chambers
Time of Update: 2022-10-13
Constant temperature and humidity test chamber is a common environmental test equipment, although its coverage rate is second only to the oven, and with the customer's pursuit of the quality of machin
-
Constant temperature and humidity test chamber walk-in instruction manual
Time of Update: 2022-10-13
If there is an abnormality in the whole process of applying the constant temperature and humidity test chamber, do not carry out disassembly and maintenance independently, because there is no appropriate maintenance method not only can not deal with mechanical failures but also may make the original problems of machinery and equipment more serious.
-
Introduction to the automatic control system of condensate constant temperature and humidity test chamber
Time of Update: 2022-10-13
Full intelligent integrated control board (program control) 2.
Full intelligent integrated control board (program control) 2.
Full intelligent integrated control board (program control) 2.
-
Reasons and Solutions for Humidity Failure of Constant Temperature and Humidity Test Chamber
Time of Update: 2022-10-11
If not, check that there is no water in the wet bulb water tank or the water level is low, and the gauze cannot absorb water.
If not, check that there is no water in the wet bulb water tank or the water level is low, and the gauze cannot absorb water.
-
About the low temperature constant temperature and humidity test chamber measurement calibration appropriate way
Time of Update: 2022-10-03
New items, methods, measurements and calculations of low temperature and constant temperature and humidity test chamber measurements1, basic concepts: (1) Undulations: The main parameters of the indoor space positioning point in the work of the environmental test equipment change with time under stable conditions.
-
Where does the noise of the constant temperature and humidity test chamber come from?
Time of Update: 2022-10-03
The lubricating oil of the system is too much, resulting in liquid strike, and noise; The noise of the constant temperature and humidity test chamber will also affect the test.
-
Constant temperature and humidity test chamber installation knowledge
Time of Update: 2022-10-03
Fourth, after checking that there is no mistake, the constant temperature and humidity test box should be left for half an hour, turn on the power supply, carefully listen to whether the sound of the compressor is normal when starting and running, if the noise is large, you should check the electricity, whether the constant temperature and humidity test box is placed smoothly, whether the pipelines are in contact, and make corresponding adjustments.