Chemical plant corrosion is a common problem faced by chemical enterprises, reflecting lack of knowledge of corrosion prevention, small mistakes in equipment operation, often bring unexpected huge economic losses to enterprises.
Natural real stone paint production and construction how to adjust the color difference
Time of Update: 2020-12-27
is shallow first, then deep, first more and then less, by shallow repair deep easy, by deep repair difficult. For the addition of less, darker color color sand to take the method of fastening, often can largely solve the repeated number of color correction
What if the wall is too dark or too light? What are the techniques for latex paint coloring?
Time of Update: 2020-12-23
The color of various latex paints is generally lighter in wet films, and when latex paint is dry, the color deepens.
AkzoNobellin Liangxuan: Light illuminates the color of everything in the world
Time of Update: 2020-12-20
In 2017, paint companies in environmental inspection, quality inspection, tax inspection, raw material prices and many other adverse factors floating. 2018 has arrived, experienced the baptism of 2017, the paint industry has experienced challenges
Is the color difference produced on the wall of the coating a problem of the coating?
Time of Update: 2020-12-07
the overall repair. 6) Coating pre-substrate to be treated qualified, flat and surface roughness consistent. 7) The drying time temperature should be strictly controlled in the process time, and the drying and drying specifications should
The cause of the color difference between the coating film and the electrostitive powder coating
Time of Update: 2020-11-30
In electrostitive powder coating, the color difference between the coating film is possible because of the problems of powder coating and powder coating process control. From the powder coating itself, the general powder coating production
What are the differences between plastic colorant dyes and pigments? What are the features?
Time of Update: 2020-11-29
Organic pigment color bright, has a good brightness, but the brightness is not as bright as dyes, heat resistance is better than dyes, its relative density is small, high oil absorption value.
How to solve the problem of color difference of real stone paint?
Time of Update: 2020-11-25
, but also to keep the wall clean. color difference between old and new coatings Phenomenon : some of the quality anomalies produced during construction, large areas of completion after repair, the appearance of color differences between
The reason for the color difference between the printing spot inks
Time of Update: 2020-11-14
This is because the newly printed ink layer has a certain leveling, so the surface reflection to mirror reflection mainly, looks bright color, good gloss.
Is the water-color fastness problem difficult to solve? Exhibition experts have a different view
Time of Update: 2020-11-10
is like a long line, there is no crosslinking when the strength is low, easy to pull off, and there is no elasticity, the role of crosslinkers is to create chemical bonds between online molecules, so that the line molecules are connected to each other
How different is the color of your wall from the color card? Maybe you're missing the ultimate wall paint guide!
Time of Update: 2020-11-09
the light is not good, or choose the big white wall it is the big white wall, in fact, more generation refers to the lighter color, similar to beige.
Paint color technology, different object color basic principles introduced.
Time of Update: 2020-10-12
White light shines on a colored object, and its reflected or permeable light not only decreases in brightness but also changes in spectral composition, resulting in a variety of different colors compared to the incoming light.
Effect of different color slurry anti-sinking agent on the floating color and leveling of gray epoxy floor.
Time of Update: 2020-10-09
White pulp E30 (0.3%) - YH-908H (1.5%) Dispersant Tech-58682-X Figure 12 Construction interval 20 minutes Color difference ★★★★★ high and low undulating ground flow★★★★★ anti-sinking black slurry E65 (0.4%) .
Is the color difference produced on the wall of the coating a problem of the coating?
Time of Update: 2020-10-05
4) before coating cleaning tools, especially when changing color paint lines must be washed, to avoid color processing.
A comparative study of the performance of artificial colored sand prepared by different methods (2)
Time of Update: 2020-09-18
structure of inorganic gel gel color sand, which also showed good acid resistance and alkali resistance, and after the acid and alkali resistance test of high temperature terracotta color sand and organic dyeing color sand, there were obvious traces
