-
Ultraviolet curing sol gel hybrid coatings are used in aerospace and direct coating of metals
Time of Update: 2021-01-02
The second part discusses the corrosion protection, solvent resistance, UV stability and adhesion of UV-gel hybrid coatings on different substrates, including aeronautical substrates and composites.
-
The three steps of interior wall coating cannot be saved
Time of Update: 2020-12-29
surfaces with a mixture of detergent and water, then rinse and dry the surface sufficiently. (point closed primer), you can also consider the entire area of the top coating, for the best adhesion, and the paint has the best appearance. 。 2
-
Water-based polyurethane coating formulation and process steps
Time of Update: 2020-12-27
, the reaction temperature is low, the yield can reach 90 %, and then the triple catalysis method is used to promote the reaction completely, and the residual base is closed. product formulation: NCO: polyol pyriclic acid (the ratio
-
Inorglis gels - Inorder gels for architectural coatings
Time of Update: 2020-12-23
Introduction to inorganic gels for architectural coatings: magnesium silicate aluminum inorganic gels with pure natural non-toxic, harmless, tasteless bentoyl raw materials, the use of its natural excellent hydrophilic, adhesive, adsorption
-
The last madness of pig prices: pig production capacity restored to 90%, the next step pork or
Time of Update: 2020-12-22
, is the increase in the amount of pickled bacon in the south, from November in the southwest, central China to buy pork consumption demand rose, November's rural pork trading volume rose 6.5 percent, up 9.3 percent year-on-year, which also let pork continue
-
The construction step method of diatom mud coating
Time of Update: 2020-12-14
Method/step 1, to ensure that the substation is flat, dense, clean, moisture content is less than 10%, PH value is less than 10, yin and yang angle and line flat and straight; 2, in the paint professional and technical personnel
-
After the protective coating is broken, it automatically heals and restores the self-healing material to open up commercial applications
Time of Update: 2020-12-09
Engineering of the Chinese Academy of Sciences developed a "magic powder" - "Jufu Shield" for Shandong Gig New Materials Technology Co., Ltd. as an intelligent nano-coated material additive, poly-composite shield can repair itself after
-
Graphite coating: Solar hydrogen fuel is one step closer
Time of Update: 2020-11-12
Most electricity is made from burning methane, so researchers at the University of Bath are developing new solar cells that use light energy directly to break down water.
-
The experimental step of measuring protein molecular weight by gel layering method.
Time of Update: 2020-10-26
, the glue surface to be collected rises to about 5 cm away from the top of the column when the stop loading column, close the outlet. The mounting column requires continuous, uniform, bubble-free, and no "pattern". is connected to the constant
-
The mechanical properties and deadhesive properties of sol-gel coatings.
Time of Update: 2020-10-21
The effective elastic mould and hardness values of each coating are estimated along the depth of indentation, based on substrate and sol-gel properties.
-
Effect of processing process on the performance of hybrid sol-gel super-hydrophobic coatings.
Time of Update: 2020-10-16
between silicon dioxide NP and sol-gel substates, as well as between sol-gel substates and glass substates. dual-curing SHC has the highest mechanical and environmental durability so three curing processes are studied: thermo cure, radiation
-
Sol-gel technology sprays ultra-hydrophobic coatings on cotton fabrics.
Time of Update: 2020-10-08
In a new study, hydrophobic surfaces on cotton fabrics were obtained using sol-gel technology to produce coatings applied by spraying presumed solutions, followed by drying and heat treatment.
-
Restoring dynamics of acrylic coated surfaces.
Time of Update: 2020-10-04
It is believed that this behavior can provide new insights in the field of research, such as controlled repair of coatings.
-
Global paint and coating industry is difficult to "walk in step"
Time of Update: 2020-09-27
China Coatings Network News: The global Paints and Coatings industries are going through a turbulent period, with some companies reporting record sales and profits in the first half of the year, but growth in different
-
Common knowledge of coating: eight steps of applying emulsion paint in roughcast room
Time of Update: 2020-04-03
Core tip: Wall "this kind of thing, everyone and every day will see that if the wall is not well done, it will not only have an impact on the overall environment of the home
-
Coating knowledge: three steps of waterproof coating
Time of Update: 2020-04-03
Core tip: [news] there are two kinds of waterproof materials for home decoration sold on the market: one is modified asphalt waterproof coating with glass fiber cloth, which can
-
Coating standard: coating inspection steps, each step is very important
Time of Update: 2020-04-03
Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively.
-
Coating knowledge: home decoration: three steps to save coating cost
Time of Update: 2020-04-03
Core tip: there are a wide range of coating products in the market now, and there are many good products, but how can we choose the coating that we are satisfied with? But each
-
Coating knowledge: four steps to distinguish diatom mud
Time of Update: 2020-04-03
If the wall surface is as smooth as after painting and has reflection phenomenon, it can be basically determined that it is fake diatom mud or diatomite containing Low quality products.
-
Common knowledge of coating: small details of waterproof construction steps of bathroom cannot be ignored
Time of Update: 2020-04-03
7. After the completion of waterproof construction, water storage test shall be carried out, and no leakage is deemed as qualified after more than 24 hours.
