-
Coating classification: orange peel effect of powder coating
Time of Update: 2020-04-03
It is very important to control the visual appearance (gloss, haze, leveling orange peel) of powder coating film, especially in the assembly of parts sprayed in different occasions.
-
How to avoid the occurrence of orange peel in powder coatings
Time of Update: 2020-03-25
in practice often use flow promoters or leveling agents to improve the appearance of the coating film to eliminate orange peel, shrink holes, pinholes and other surface defects.
-
How to avoid orange peel caused by powder coating
Time of Update: 2020-03-25
In practical work, active propellants or leveling agents are often used to improve the appearance of the coating to eliminate the appearance defects such as orange peel, shrinkage cavity, etc.
-
How to avoid the occurrence of orange peel in powder coatings
Time of Update: 2020-03-25
in practice often use flow promoters or leveling agents to improve the appearance of the coating film to eliminate orange peel, shrink holes, pinholes and other surface defects.
-
How to avoid the occurrence of orange peel in powder coatings
Time of Update: 2020-03-25
In practice, flow accelerator or leveling agent is often used to improve the appearance of the coating to eliminate surface defects such as orange peel, shrinkage cavity and pinhole.
-
How to avoid the phenomenon of orange peel produced by powder coating
Time of Update: 2020-03-25
in practice often use active propellant or leveling agent to improve the appearance of the coating film to eliminate orange peel, shrink holes, and other external shortcomings.
-
How to avoid the occurrence of orange peel in powder coatings
Time of Update: 2020-03-25
In practice, flow accelerator or leveling agent is often used to improve the appearance of the coating to eliminate surface defects such as orange peel, shrinkage cavity and pinhole.
-
Discussion on the problem of orange peel in powder electrostatic spraying
Time of Update: 2020-03-05
1.1.2 effect of powder particle size distribution Generally speaking, when the particle size is greater than 75 m of powder proportion is too much, will cause the film's leveling performance is poor, easy to produce orange peel phenomenon.
-
Discussion on orange peel in powder electrostatic spraying
Time of Update: 2020-03-05
Orange peel is a common and difficult to overcome Leveling Problem in the coating process
There are many influencing factors, which greatly affect the smoothness
-
Judgment of the appearance of powder coating orange peel
Time of Update: 2020-02-21
can visually evaluate and compare the appearance of orange peels using mechanical methods of the shape gauge or through ripple scanning.
-
Judgment of the appearance of powder coating orange peel
Time of Update: 2020-02-21
In this method, a laser source is used to irradiate the surface of the sample plate at an angle of 60 ° and then measure the reflected light at the same relative angle.
-
Judgment of the appearance of powder coating orange peel
Time of Update: 2020-02-21
can visually evaluate and compare the appearance of orange peels using mechanical methods of the shape gauge or through ripple scanning.
-
Judgment of the appearance of powder coating orange peel
Time of Update: 2020-02-21
In this method, a laser source is used to irradiate the surface of the sample plate at an angle of 60 ° and then measure the reflected light at the same relative angle.
-
Formulation design of orange powder coating
Time of Update: 2020-02-18
Abstract: Based on the texturing mechanism of orange peel powder coating, this paper discusses the influence of flocculent, amount of pigment and filler, baking conditions
-
Orange powder coating formulation design
Time of Update: 2020-02-18
the entire molten powder coating surface formation surface tension gradient, according to the Bernal vortex flow theory, in the surface tension is small place to form a shrinkhole, so that the coating film formed a uneven orange surface.
