-
The manufacturing and coating process of UV-cured powder coatings
Time of Update: 2021-01-20
the UV-cured resin is obtained. The analysis shows that the fluidization performance of the synthetic resin meets the requirements of low temperature cured powder coating, and only the unsaturated group of traces remains after the resin cures
-
The basic properties and future development direction of water-based UV coatings are analyzed
Time of Update: 2021-01-16
China Coatings Online News Information: 1, the basic performance and advantages of water-based UV coatings 1.1 basic performance of water-based UV coatings Of all the components, the most important impact on the performance of water
-
A new anti-light agent is used in low-gloss UV curing coatings
Time of Update: 2021-01-01
Special amoeba synthetic silica combined with specific polydimethylsiloxane surface treatments improves the efficiency of light dissipation, and this new product, designed for low-light, high-transparency, low-viscosity systems, is designed for UV-cured coatings.
-
Research on the preparation and performance of UV-cured hydro-water coatings
Time of Update: 2020-12-29
. A diagram of the specific reaction process is shown in Figure 1. 1. 3 UV photo-curing coating preparation the photosensitive hydro-hydroploric prejudging decompression distillation, add light trigger, active thinner, stirring and dispersing
-
UV curing coating composition and performance
Time of Update: 2020-12-29
, the introduction of flexible long chain to overcome the brittleness of epoxy resin. 1.3 Polyurethane Acrylates (PUA) Polyurethane acrylate (PUA) are NCO groups and polyols made from polycyanate Hydroxyl reaction, and the introduction
-
Research on the application of UV-cured coatings in the field of metal corrosion prevention
Time of Update: 2020-12-27
and abroad. The problems and solutions in the application of UV curing coatings in the field of metal corrosion protection are analyzed. This paper discusses the ways and means to solve the adhesion of UV curing coating to metal substrate
-
The radiation curing components are applied to scratch-resistant hard coatings
Time of Update: 2020-12-26
This article describes a range of ultraviolet curing products with high-level energy, including 100% solid low-polymer and water-based polyurethane dispersions, which can be formulated with excellent scratch, wear and weather resistance to support their application in outdoor coatings.
-
Trends in the use of UV curing coatings in formulation, production, coating processes and equipment
Time of Update: 2020-12-13
include the following: . Adhesives . Paints . . Inks . . . hood varnishes Formula materials, methods and devices for UV (ultraviolet light), EB (electron beam) and IR infrared applications may be: . water-based coatings
-
Chinese and American scholars have developed new glass coatings that can be applied to windows to reduce room temperature
Time of Update: 2020-12-08
Researchers at the Massachusetts Institute of Technology and the University of Hong Kong have developed a new type of window coating that they hope will automatically lower the temperature of their homes and reduce their reliance on air conditioning.
-
Applied research on powder coatings in the field of photovoltaics (I.)
Time of Update: 2020-12-06
Acrylic powder coatings with high transparency, good weather resistance, good chemical resistance, good immersion, high reaction activity advantages, can meet the requirements of the solar energy industry.
-
Water-based asphalt anti-corrosion paint, an environmentally friendly anti-corrosion coating applied to pipes
Time of Update: 2020-12-02
product characteristics: water-based asphalt coating adhesion, paint film toughness is high, has superior water resistance, moisture resistance, good acid resistance, alkaline resistance, chemical resistance.
-
HpLC method determines the content of light triggers in UV curing coatings
Time of Update: 2020-12-01
recovery rate and relative standard deviation of 5 light triggers (n-7) 2.4 sample analysis accurately called the appropriate amount of samples, according to 1.3 sample treatment, in 1.2 chromatography conditions, see Table 5.
-
The characteristics and advantages of waterproof coatings are analyzed in this paper
Time of Update: 2020-11-30
Waterproof coating in the construction process has a good temperature adaptability, easy to operate, easy to repair and maintain, and liquid form can be painted to the corner of the edge, so as to achieve all-round waterproof protection.
-
The composition and performance of UV-cured coatings
Time of Update: 2020-11-27
been recognized by the world paint industry and the vast majority of regulatory agencies. UV coatings have the advantages of non-volatile organic compounds, fast curing speed, small environmental pollution and good curing product performance.
-
Excellent silver row UV single coat resin - FSP5590
Time of Update: 2020-11-26
UV single coating is the traditional primer, paint two coating process into a coating process, compared to the traditional PU coating, greatly improve production efficiency and reduce energy consumption, in recent years, UV single coating process
-
The first white paper on antiviral coatings was released, and NetEase joined with Carberry
Time of Update: 2020-11-25
in China's first launch and market application of Corning Guardiant™ technology antiviral coatings. the birth of this revolutionary black technology products, which has aroused the attention and heated discussion of the paint industry.
-
A brief description of UV coatings
Time of Update: 2020-11-24
3 light trigger is a key component of UV coatings, its role is to transmit the energy of ultraviolet photons, rapidly trigger the cross-linking polymerization of monomers and lysates, and promote the system's liquid solid conversion process.
-
The best configuration for 100% UV curing coatings to dissipate
Time of Update: 2020-11-21
In recent years, with the increasingly strict environmental protection policy, the rapid growth of environmentally friendly coatings. Solvent-free volatile 100% UV system due to fast curing speed, low coating cost, excellent paint film performance
-
The best configuration for 100% UV curing coatings to dissipate
Time of Update: 2020-11-18
In recent years, with the increasingly strict environmental protection policy, environmental protection paint rapid growth. Solvent-free volatile 100% UV system due to fast curing speed, low coating cost, excellent paint film performance and so
-
Resource-saving paper finishing as an alternative to UV coating
Time of Update: 2020-11-18
According to ISO 535:1991 Cobb-1800 waterproof "water-resistant - paper finishing" in a single coating up to 70g / m2 (at a thickness of 2 m layer).
