-
What kind of functional characteristics does the torque wrench tester have
Time of Update: 2022-10-20
The digital and instrumented display of torque force value is accurate and intuitive, and the mortise is simple to formulate and easy to clamp.
The digital and instrumented display of torque force value is accurate and intuitive, and the mortise is simple to formulate and easy to clamp.
-
YYT 1506-2016 Surgical implant metal bone screw rotation torque test method
Time of Update: 2022-10-19
The test setup shall be able to fit with the test block, test block fixture, drill sleeve, and drill sleeve clamping fixture described in accordance with ASTMF1839 material.
-
Prefilled Syringe Luer Cone Guard Unscrewing Torque Tester - Technical Literature
Time of Update: 2022-10-06
8 MPa (air source provided by the user) Weight 36kg Working temperature 15℃-50℃ Relative humidity 80%, non-condensing Working power 220V 50Hz Pre-filled syringe Luer cone cap unscrewing torque tester-Technical Literature
-
Plastic cap torque meter - recommended
Time of Update: 2022-10-03
001Nm clamping range Φ5mm~Φ170mm Data storage 1-80pcs Dimensions 400mm×280mm×190mm (Length, width and height) Weight 8kg Operating temperature 15°C-50°C Relative humidity 80%, non-condensing Working power supply 220V 50Hz Plastic cap torque meter - recommendedPlastic Cap Torque Meter - It is recommended that you encounter many problems when using bottled drinks such as.
-
The test process of the automatic torque meter
Time of Update: 2022-10-03
PNY-20A automatic torque tester is suitable for bottle cap torque detection of standard circular or standard symmetrical shape packaging containers, which can realize automatic clockwise and counter-clockwise rotation two-way test torque force, and automatically record the maximum torque force value.
-
Introduction to torque test methods for cap opening or tightening
Time of Update: 2022-10-01
NLY-20 bottle cap torque tester is designed and developed for the detection of various torques and intelligent measuring instruments, dedicated to detecting the torque of bottle cap opening or tighten
-
Torque tester used
Time of Update: 2022-09-08
4. When the instrument is tested for the first time, if the buzzer emits a continuous short "beep" alarm, which cannot be used normally, the sensor may have caused permanent (separator) long-term damage or zero drift is too large, please turn off the power of the instrument and call the after-sales service personnel in time!
-
Good effect of flange fixed torque fastening technology
Time of Update: 2021-12-04
Before implementing the fixed torque tightening technology, after the pipeline is put into operation, the maintenance personnel must be contacted in time to heat tighten the replaced valve flange bolts.
-
Low-viscosity gear grease, low-torque plastic gear oil
Time of Update: 2021-04-29
It has excellent lubricity, oxygen resistance, water resistance, low temperature performance and Mechanical stability.
Commonly used for lubrication, vibration reduction, noise reduction and damping of plastic gearsCaisdon CSD6020 is refined with synthetic oil as base oil , lithium soap as thickening agent and added with polytetrafluoroethylene ( PTFE ) powder and other functional additives .
-
Test plan for measuring torque force and tightness of aluminum cap of drug packaging materials
Time of Update: 2019-07-23
Drug packaging material is the abbreviation of materials and containers for drug packaging Its classification must be formulated and issued by the State Drug Administration, and it can be divided into
-
Operating torque of various valves
Time of Update: 2019-04-01
If the valve actuator is too small, the side cannot produce enough torque to fully operate the valve Generally speaking, we think that the required operating torque of the valve comes from the frictio
-
Application and classification of cap torque meter
Time of Update: 2015-09-16
The cap torque meter is applicable to the measurement of cap locking and opening torque value of bottle packaging products, suction nozzle packaging products and hose packaging products, such as the m
-
Inspection method of opening force and torque of bottle cap for drug packaging
Time of Update: 2015-08-06
Abstract: the opening torque is one of the important properties of drugs in bottle or hose Taking the opening torque test process of medical glass bottle as an example, this paper describes the test m
-
The application of automatic cap torque meter in anti-theft cap
Time of Update: 2015-03-20
Recently, many customers have mentioned the measurement of torque force of anti-theft bottle cap and QS certified instrument Here is the product introduction of automatic bottle cap torque meter for you!
-
Determination of the torque of the cap of plastic medicine bottle
Time of Update: 2014-08-21
Determination of the torque of the plastic medicine bottle cap: the cap torque tester is an intelligent measuring instrument designed and developed for testing various torques It is specially used to
