With the development of society and the continuous improvement of consumption level, consumers' external requirements for bottled drinks are also constantly improving
Causes of common faults of pelletizing machine and their solutions
Time of Update: 2015-10-10
Troubleshooting (the power must be cut off before the following operations can be carried out): check whether there are sundries in the gear groove and clean it.
Hot press distilled water machine appears in the world
Time of Update: 2014-11-12
Baoji Zhongli Pharmaceutical Equipment Co., Ltd. made a theme report at the seminar on research and development trend of hot press distiller.
Tips on the use of automatic flat press flat pillow packaging machine
Time of Update: 2014-06-21
First of all to see the automatic flat die-cutting machine printing bite, generally 6-10 mm.
Application of peristaltic pump in spray drying pelletizer coating machine
Time of Update: 2013-11-25
The precision of the peristaltic pump is very high, which can reach 0.5-1%, which is very conducive to the constant delivery of liquid in the process of granulation and coating.
The construction principle and the pressure sheet process of a single press machine
Time of Update: 2013-04-08
The press press press process is carried out automatically continuously by adding and pressurizing to the piece. The construction of the press is to complete such a process, Figure 16-6 for the electric single-punch press, Figure 16-7 for the main
Analysis of the principle of carbon tablets of carbon powder press machine press products
Time of Update: 2012-12-03
The finished tablet is the result of a close combination of material powder (or particles) and accessories produced by a sufficiently large cohesion force under pressure of the press and a bonding action with the excipient. In order to improve
Application of double cone rotary vacuum machine in pellet drying
Time of Update: 2012-02-08
Vacuum drying is the process of indirectly heating the material under the condition of lower than atmospheric pressure, and vaporizing the moisture in the material under the corresponding temperature, so as to reduce the moisture content in the material.
How to deal with the pressing machine
Time of Update: 2010-04-15
Therefore, it should not only focus on the hardness to meet the requirements of transportation and storage, so as to avoid too much pressure on the tablets and damage to the machine.
