-
Standard operating procedure for thin-layer chromatography.
Time of Update: 2020-10-17
on the glass plate, into a uniform thin layer. After the sample is equally sampled and unfolded, it is compared with the chromatography obtained by the appropriate control in accordance with the same method for the identification of drugs, impurity
-
Anticoagulant (hydrant) outpatient standard operating procedures expert consensus.
Time of Update: 2020-08-29
facilities requirements, diagnosis and treatment process and content, work records, information management, risk control and prevention are recommended. Expanded Guidelines: Guidelines Related to Anticoagulants: 2016 ISTH Guidelines: Treatment
-
Standard operating procedures for use, maintenance and repair of high efficiency boiling dryer
Time of Update: 2019-12-23
1 use 1.1 operation preparation (1) to check whether there is "intact" certificate of equipment
(2) check whether the power supply, air source and steam source
-
Working principle, maintenance and cleaning standard operating procedures of clean sampling vehicle (sampling vehicle)
Time of Update: 2017-08-21
Working principle of clean sampling vehicle (sampling vehicle) and standard operation procedures for maintenance and cleaning
Establish * standard operation procedures
-
Standard operating procedures for use of 30b crusher
Time of Update: 2017-06-05
Working principle of 30b crusher: the material enters into the crushing chamber, and is crushed under the impact, shear, friction of the teeth and the impact of the material
-
Introduction of standard operating procedures for super clean worktable
Time of Update: 2017-03-14
4.6 after the completion of the work, clean the working table with 0.1% Bromogeramine, turn off the air blower, turn on the ultraviolet lamp for sterilization for 30min, and then turn off the power supply.
-
Introduction of standard operating procedures for super clean worktable
Time of Update: 2016-10-24
4.4 before entering the ultra clean work area, the operator must wear clothes, trousers, caps and gloves in the buffer room, and try to avoid the action that obviously disturbs the air flow pattern.
-
Working principle, maintenance and cleaning standard operating procedures of clean sampling vehicle (sampling vehicle)
Time of Update: 2016-05-13
3. Measure the cleanliness of the working area with a dust particle counter every three months, and measure the average colony number of the clean sampling vehicle with a plate method.
-
Standard operating procedures for type 30b crusher
Time of Update: 2015-10-09
Note: there is no independent inching control button in this machine, which is completed by panel start button and stop button operation; that is to say, press start button, the motor rotates.
-
Standard operating procedures for super clean table of medical purification workbench
Time of Update: 2015-01-14
It is widely used in medical and health, pharmaceutical, chemical experiments and other fields, and provides a sterile and dust-free clean environment purification bench features 1
-
Standard operating procedures for super clean worktable
Time of Update: 2014-06-03
Standard operating procedures for super clean worktable 1 Purpose: to establish operating procedures for super clean worktable
2
Scope of application
