-
Series: Construction of solvent-free epoxy coatings in the ship's freshwater/drinking water tank (IV)
Time of Update: 2020-11-18
20.1 paint spray. 1) Paint pump. It is best to use a new pump, it is recommended to spare another pump, in the event of a pump failure or paint in the pump internal curing another can be top at any
-
Epoxy solvent-free coating tank anti-corrosion coating application
Time of Update: 2020-11-18
From crude oil transportation, storage transit, pipeline transportation, refining production to the storage of refined oil products, all need to build a large number of tanks, laying a large number of pipelines, such as the use of solvent-free epoxy coatings, and traditional solvent-based anti-corrosion coatings, with good thick coating, good corrosion resistance, construction safety and other advantages, in line with the "efficient, economic, environmental protection, safety, energy-saving" principle, with a very broad application prospects.
-
Series: Construction of solvent-free epoxy coatings in the ship's freshwater/drinking water tank (V)
Time of Update: 2020-11-18
22. remove protection, change the air pipe, coating defect treatment, repair / thickening / repair spray 1) 2 degree coating to reach a hard dry state after removing the protection changer pipe, pa
-
Series: Construction of solvent-free epoxy coatings in the ship's freshwater/drinking water tank (I)
Time of Update: 2020-11-18
When the outer wall of the roof is an exposed deck, in the case of direct summer sunlight, the surface temperature of the roof can reach 50-60 degrees C , air conditioning equipment can not play its full role, high temperature will make solvent-free epoxy coating quickly cured; In addition, if there is no corresponding shade measures, the cabin temperature is too high may cause workers to experience heat stroke.
-
Series: Construction of solvent-free epoxy coatings in the ship's freshwater/drinking water tank (II)
Time of Update: 2020-11-18
9. of structural defects. to organize joint inspections to repair welds and steel surface defects. Focus on checking for defects such as sharp edges, gas cutting edges, pores, bite edges, splashes, i
-
Series: Construction of solvent-free epoxy coatings in the ship's freshwater/drinking water tank (III)
Time of Update: 2020-11-18
During winter construction, the pre-coated paint can not be heated too high, generally 20 degrees Celsius or so, there have been pre-coated paint because the heating temperature is too high to quickly exceed the life of the tank can not be used; Spraying construction is a whole barrel mixing, power tools stirring.
-
Introduction of the advantages and disadvantages of two different solvents in the extraction tank of traditional Chinese Medicine
Time of Update: 2013-07-11
The raw material of traditional Chinese medicine extraction tank is usually solid, so the extraction process is liquid-solid extraction, commonly known as leaching, also known as extraction or leachin