-
Coating knowledge: synthetic resin type
Time of Update: 2020-04-03
Since the introduction of this technology, powder coating has been able to continue to maintain the Home of coatings: there are many kinds of synthetic resins.
-
Coating classification: synthetic resin epoxy coating
Time of Update: 2020-04-03
Core tip: Introduction: synthetic resin epoxy coating is an epoxy coating with synthetic resin (phenolic, acid polyester, urea formaldehyde resin, etc.) as curing agent, mainly
-
Coating classification: thermosetting two-component coating composition and coating articles
Time of Update: 2020-04-03
Core tips: a coating composition and coating article with excellent low-temperature curing property, finishing property, hardness of coating film, stability of extinction coating
-
Common sense of coating: five steps to choose environmental protection paint, right choice of environmental protection building materials and green home decoration
Time of Update: 2020-04-03
It is suitable for leather Paint Home News: a large number of composite plates, adhesives and paints are used in modern decoration, which are the main pollution sources of formaldehyde, benzene, ammonia, TVOC, toluene, xylene and other toxic gases.
-
Coating formulation: formulation design of ceramic powder coating
Time of Update: 2020-04-03
All construction coatings have passed ISO9001 Home of coatings: ceramic powder coating is composed of natural mineral inorganic filler, thickener, curing agent, binder and complexing agent.
-
Paint common sense: how to choose wardrobe paint
Time of Update: 2020-04-03
Core tip: due to over exploitation of modern resources, a large number of composite plates, adhesives and paints are used in modern decoration, which are the main pollution sources
-
Three effective prescriptions for tongue ulcer
Time of Update: 2020-04-03
Rinsing with salt water several times a day can keep the mouth clean and temporarily relieve the pain caused by tongue ulcer.
-
Common knowledge of coatings: sources of indoor harmful factors
Time of Update: 2020-04-03
When the building is completed, radon (222Rn) and its daughters, the decay substance of radium, will be released into the indoor air and enter the human respiratory tract, which is one of the causes of lung cancer.
-
Coating standard: new formaldehyde emission standard will be issued soon, and E2 standard in the original standard will be eliminated
Time of Update: 2020-04-03
This time, it is mainly aimed at the mandatory national standard GB18580-2001 indoor decoration materials, wood-based panels and products formaldehyde emission limit.
-
Coating classification: moisture curing polyurethane coating
Time of Update: 2020-04-03
It is suggested that moisture curing polyurethane coating belongs to one component polyurethane coating
Moisture curable one component polyurethane coating is a very
-
General knowledge of coating: requirements for construction conditions of polyurethane rigid foam spraying
Time of Update: 2020-04-03
Core tips: 1
Environmental temperature requirements The suitable temperature for spray foaming is 15~35 degrees C, the temperature is too low, the foam is easy to fall
-
Coating process: 801 glue production process
Time of Update: 2020-04-03
(8) When the temperature of the material is reduced to about 90 ℃, add the diluted formaldehyde aqueous solution to the glue in a trickle way, and control the dosage of the formula within 15 minutes (mixing can't stop).
-
Coating standard: spray polyurea waterproof coating (GB / T 23446-2009
Time of Update: 2020-04-03
Core tips: 1 basis for standard formulation This standard is formulated on the basis of: First, it refers to JIS a6021-2000 waterproof coating for building and GB / T 19250-2003
-
What are the benefits of osmotic diuretics
Time of Update: 2020-04-03
In addition, the presence of osmotic substances in the fluid filtered by the kidney reduces the amount of water absorbed by the blood, thus increasing the amount of urination.
-
Coating knowledge: modification of urea formaldehyde resin
Time of Update: 2020-04-03
It is suggested that urea formaldehyde resin should be modified to improve its performance and expand its application because of its disadvantages such as poor initial viscosity
-
Is methotrexate effective in the treatment of psoriatic arthritis
Time of Update: 2020-04-03
For moderate to severe psoriatic arthritis, long-term low-dose oral administration of this drug usually has some effect.
-
Common knowledge of coating: what are the ways to remove formaldehyde
Time of Update: 2020-04-03
Core tips: formaldehyde can be made into finishing agent, color fixing agent, softener and urea formaldehyde resin adhesive, mainly from synthetic fabrics such as artificial board
-
Paint knowledge | amino paint formula introduction what is the price of amino paint
Time of Update: 2020-04-03
All construction coatings have passed ISO9001 Home of coatings news: amino paint is mainly composed of two parts, one is amino resin component, mainly including butylated melamine formaldehyde resin, methylether hexahydroxymethyl cyanoamide resin, butylated urea formaldehyde resin and other resins.
-
What is urotherapy
Time of Update: 2020-04-03
Proponents of urotherapy claim that there have been no reports of diseases caused by drinking your own urine, but it has saved many lives.
-
Coating knowledge: urea formaldehyde resin composition
Time of Update: 2020-04-03
The key points are as follows: (1) the urea formaldehyde resin used as molding powder requires the use of condensation polymer with a shallow degree of reaction
