-
Yanfeng Zhang's group and collaborators have made important progress in the controllable preparation and magnetic properties of novel self-inserting phase iron selenide nanomaterials
Time of Update: 2023-02-02
Recently, Professor Zhang Yanfeng's research group and his collaborators from the School of Materials Science and Engineering of Peking University prepared a new iron selenide nanomaterial with iron self-inserting layer structure by chemical vapor deposition, and obtained two-dimensional iron selenide materials with room temperature ferromagnetic properties by adjusting the proportion of iron intercalation, and the related work was published in Advanced Materials.
-
SPORT GROUP and BASF collaborate on sustainable sports floors
Time of Update: 2023-01-14
SPORT GROUP, of which Polytan is a subsidiary, is partnering with the German multinational chemical company BASF to distribute and install Infinergy®'s new sustainable flooring system .
-
The domestic dispute over the route of power lithium batteries has become the focus of heated discussion
Time of Update: 2022-11-20
The Ministry of Industry and Information Technology said that it will carry out a risk assessment of ternary lithium batteries, and suspend the inclusion of ternary lithium battery buses in the list of recommended models for the promotion and application of new energy vehicles before the assessment is completed.
-
Issue 29/2013 - DSM provides bio-based reinforced composite polyamides for car engine trim covers
Time of Update: 2022-11-12
DSM offers bio-based reinforced composite polyamides for car engine decorative coversDSM has provided a green, high-performance solution for Mercedes-Benz's new A-Class engine trim cover, which uses DSM's EcoPaXXTM Q-HGM24 reinforced composite polyamide 410, which is made from castor beans, a renewable resource, about 70% of which comes from renewable resources.
-
Issue 10/2014 - Celanese introduces anti-counterfeiting technology for engineered materials
Time of Update: 2022-11-12
In addition, other Celanese technologies include x-ray inspection technology.
In addition, other Celanese technologies include x-ray inspection technology.
In addition, other Celanese technologies include x-ray inspection technology.
In addition, other Celanese technologies include x-ray inspection technology.
-
Kunlun Engineering General Contractor Guangdong Petrochemical Aromatics Complex
Time of Update: 2022-11-06
6 million tons/year aromatics complex adopts the latest light desorbent-type adsorption separation, dealkylation-type isomerization, high-heavy aromatics proportion disproportionation and transalkylation processes .
6 million tons/year aromatics complex adopts the latest light desorbent-type adsorption separation, dealkylation-type isomerization, high-heavy aromatics proportion disproportionation and transalkylation processes .
-
The structural composition of the high-speed rotary tablet press can be understood throughout
Time of Update: 2022-10-06
High-speed rotary tablet press the whole machine is composed of feeding equipment, trajectory organization, turntable structure, filling equipment and sheet thickness (pressure) equipment, the following small series briefly introduce to you: 1, feeding equipment: The equipment is composed of adding hoppers, screws, feeders and so on.
-
Filter fixtures have a smaller residual volume for higher product recovery rates
Time of Update: 2022-09-21
Since tangential flow filtration requires power, a reliable fixture is required to support internal pressures.
Since tangential flow filtration requires power, a reliable fixture is required to support internal pressures.
Since tangential flow filtration requires power, a reliable fixture is required to support internal pressures.
-
The hanging device improves the level of water quality monitoring
Time of Update: 2022-09-20
The device can be used to screen out reliable agents and debug the amount of agent used to achieve optimal use results, improve water quality, and solve system problems such as pipeline fouling and corrosion.
-
The car shifts, the "plastic" degree is faster
Time of Update: 2022-08-23
It is possible to reduce the weight of the car, thereby improving the power of the car, reducing fuel consumption and reducing exhaust pollution The most effective solution for lightweighting is to reduce the weight by using lighter components on the entire vehicle, but there are very strict requirements on the quality of materials, and it is necessary to ensure the strength and safety of the vehicle.
-
Kao launches soft-packed cleansing series, which can reduce plastic by 50
Time of Update: 2022-08-23
In addition, the clever pump head design allows consumers to easily use up "the last drop of shower gel (shampoo, hand soap) " .
In addition, the clever pump head design allows consumers to easily use up "the last drop of shower gel (shampoo, hand soap) " .
-
Thermoplastic composite materials help achieve lightweight, energy saving and emission reduction
Time of Update: 2022-08-18
The lightweight design of the body structure offers great performance potential “The excellent mechanical properties of this hybrid A-pillar are evidenced by the post-injection molding of steel sheet, Tepex billet, Durethan polyamide 6 or polyamide 66 compound, and hybrid inserts based on structural foams such as L-5235 can be used for post-injection molding.
-
Dongcai Technology's 20,000 tons of optical polyester base film is expected to reach production in 2021
Time of Update: 2022-08-18
It is expected to be put on the market in batches as soon as the first half of 2021 It is understood that on October 31, 2018, Dongcai Technology issued an announcement on the investment and construction of the "20,000-ton per year optical-grade polyester base film project for OLED display technology" through its wholly-owned subsidiary Jiangsu Dongcai.
-
Huntsman develops new filler metering system that enables cast polyurethane elastomers to contain up to 25% recycled content
Time of Update: 2022-08-17
Huntsman has developed a new ready-to-use filler metering system that can mix up to 25 percent recycled content (by weight) into hot-cast polyurethane elastomer systems .
Huntsman has developed a new ready-to-use filler metering system that can mix up to 25 percent recycled content (by weight) into hot-cast polyurethane elastomer systems .
-
Glass-fiber-reinforced polyamide 6 for automotive battery housings, lightweight without sacrificing performance
Time of Update: 2022-08-17
Dr. Bernhard Helbich, Technical Key Account Manager at LANXESS' Performance Materials business unit, explains: "We believe that in the future, polyamide 6 products of this type will be used in the mass production of housings and other thermal management components for electric vehicles.
